Need some help... I blew like 7 fuses... I was replacing the battery, but nothing was happening when i tried turning the key... Then i notice the green 30 fuse was blown... So I replaced it and as soon as it touched the metal it was blown again... So would try different ways to connect it like putting the fuse in first then connecting the hot or ground wire to the battery but to no avail the same thing, a blown fuse... Below I attached a picture so you know what fuse Im talking about... Please any suggestions on whats going on will be greatly appreciated... I have no idea, unless i need to replace the part that the fuse go in...
Fuse Question, need help
Moderators: Site Director, FZR Forum Moderators
Fuse Question, need help
I keep blowing the green 30 fuse running to the hot wire for the battery...
Need some help... I blew like 7 fuses... I was replacing the battery, but nothing was happening when i tried turning the key... Then i notice the green 30 fuse was blown... So I replaced it and as soon as it touched the metal it was blown again... So would try different ways to connect it like putting the fuse in first then connecting the hot or ground wire to the battery but to no avail the same thing, a blown fuse... Below I attached a picture so you know what fuse Im talking about... Please any suggestions on whats going on will be greatly appreciated... I have no idea, unless i need to replace the part that the fuse go in...

Need some help... I blew like 7 fuses... I was replacing the battery, but nothing was happening when i tried turning the key... Then i notice the green 30 fuse was blown... So I replaced it and as soon as it touched the metal it was blown again... So would try different ways to connect it like putting the fuse in first then connecting the hot or ground wire to the battery but to no avail the same thing, a blown fuse... Below I attached a picture so you know what fuse Im talking about... Please any suggestions on whats going on will be greatly appreciated... I have no idea, unless i need to replace the part that the fuse go in...
Finally got her up and running...
LED turn signals installed under rear fairings...
HID headlights...
Front and Rear flush mount turn signals...
Custom handle grips...
Painted Fairings, frame and rims...
Custom gator seats...
Custom helmet, cost more that what i paid for the bike... funny...
LED turn signals installed under rear fairings...
HID headlights...
Front and Rear flush mount turn signals...
Custom handle grips...
Painted Fairings, frame and rims...
Custom gator seats...
Custom helmet, cost more that what i paid for the bike... funny...
Re: Fuse Question, need help
If you have blown nothing else besides 7 30A fuses, count yourself very very lucky. Replaced your battery lately, did you?
Look at your pic. Look very very closely. Look at the markings on the battery beside the big Red and Black wires...
Look at your pic. Look very very closely. Look at the markings on the battery beside the big Red and Black wires...
1989 3LN1 FZR250R, currently stock.
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
-
Freestyle72
- Level 4.0

- Posts: 418
- Joined: Sun May 10, 2009 8:23 am
- Location: Milton, Ontario, Canada
Re: Fuse Question, need help
In case you didn't catch what Don was trying to say. The battery leads should be reversed.
Black is typically ground (-ve) and Red is usually Positive (+ve). You should try to keep it that way if you don't want broken stuff.
Black is typically ground (-ve) and Red is usually Positive (+ve). You should try to keep it that way if you don't want broken stuff.
Re: Fuse Question, need help
Awww Thank you so much, I looked at everything except the battery... MAN thank you so much...
Finally got her up and running...
LED turn signals installed under rear fairings...
HID headlights...
Front and Rear flush mount turn signals...
Custom handle grips...
Painted Fairings, frame and rims...
Custom gator seats...
Custom helmet, cost more that what i paid for the bike... funny...
LED turn signals installed under rear fairings...
HID headlights...
Front and Rear flush mount turn signals...
Custom handle grips...
Painted Fairings, frame and rims...
Custom gator seats...
Custom helmet, cost more that what i paid for the bike... funny...
Re: Fuse Question, need help
Thank you, Captain Obvious. I wanted him to spot it himself and appreciate the full weight of theFreestyle72 wrote:The battery leads should be reversed.
r0bertt - Hopefully you haven't blown anything besides a handful of fuses. Let us know how it goes!
1989 3LN1 FZR250R, currently stock.
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
-
Freestyle72
- Level 4.0

- Posts: 418
- Joined: Sun May 10, 2009 8:23 am
- Location: Milton, Ontario, Canada
Re: Fuse Question, need help
Bwahaha I am sorry Don, but with the gravity of the situation I was afraid he wouldn't notice.DonTZ125 wrote:Thank you, Captain Obvious. I wanted him to spot it himself and appreciate the full weight of theFreestyle72 wrote:The battery leads should be reversed.moment...
r0bertt - Hopefully you haven't blown anything besides a handful of fuses. Let us know how it goes!
Re: Fuse Question, need help
That's actually the incorrect battery. The leads may not reach.
'92 FZR600
Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder

Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder

Re: Fuse Question, need help
The leads do reach, Advance auto gave me the battery and stated it would be compatable, that's what through me off, because I was thinking the battary went in the same way so I was not thinking about how the leads needing to switched... But yeah I knew what DONTZ125 was talking about...
Finally got her up and running...
LED turn signals installed under rear fairings...
HID headlights...
Front and Rear flush mount turn signals...
Custom handle grips...
Painted Fairings, frame and rims...
Custom gator seats...
Custom helmet, cost more that what i paid for the bike... funny...
LED turn signals installed under rear fairings...
HID headlights...
Front and Rear flush mount turn signals...
Custom handle grips...
Painted Fairings, frame and rims...
Custom gator seats...
Custom helmet, cost more that what i paid for the bike... funny...
Re: Fuse Question, need help
I throughly enjoyed this thread. Thank you for a laugh.

