electrical issue please help

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
itzyaboybugz
Site Newbie
Posts: 6
Joined: Sun Sep 08, 2013 1:28 pm
Location: 410

electrical issue please help

Post by itzyaboybugz »

fixed voltage regulator, charged battery, kick stand up, front yellow signals lit, no accesory lights lit, wont let me start bike, i tilt/shake the bike and accesory light sometime will light up n i can start bike, choke, let idle, purrs like kitten, as soon as i sit on bike or move it at all the bikes cuts itself off n no accesory light, thinking loose cable, bad fuse or corrosion.... got motorcycle license today and really want to ride, i have side and rear plastics off of bike

thank you

PLEASE HELP
User avatar
Kevadlilleke
100+ Posts
100+ Posts
Posts: 113
Joined: Mon Sep 03, 2012 3:38 pm
Location: Estonia

Re: electrical issue please help

Post by Kevadlilleke »

What's an accessory light? Just curious...
1990 FZR 1000, 1993 engine, terrible state... but improving.
[Project thread] The Yellow FZR - 1990/1993 FZR1000
2012 Image Image 2013 Image 2014 Image
User avatar
Kevadlilleke
100+ Posts
100+ Posts
Posts: 113
Joined: Mon Sep 03, 2012 3:38 pm
Location: Estonia

Re: electrical issue please help

Post by Kevadlilleke »

Based on viewtopic.php?f=8&t=11232 I'd assume you have some loose connectors or broken cables.
1990 FZR 1000, 1993 engine, terrible state... but improving.
[Project thread] The Yellow FZR - 1990/1993 FZR1000
2012 Image Image 2013 Image 2014 Image
itzyaboybugz
Site Newbie
Posts: 6
Joined: Sun Sep 08, 2013 1:28 pm
Location: 410

Re: electrical issue please help

Post by itzyaboybugz »

I FIXED IT, CUT IGNITION WIRE, SPLICED IT, NOW JUST GOTTA TAPE IT, COMPLETELY FIXED IT THANK YOU SO MUCH


NOW IM RUNNING INTO ISSUE WHERE IT INDICATOR LIGHT SAYS THAT MY HIGH BEAMS R ON WHEN THEY ARE OFF, THAT NEEDS TO BE FIXED BEFORE I CAN PASS INSPECTION... ANY IDEAS
User avatar
reelrazor
Wrench
Wrench
Posts: 1658
Joined: Sun Oct 05, 2008 8:19 am

Re: electrical issue please help

Post by reelrazor »

take switch apart (handlebar unit) clean and apply dielectric grease
http://www.michiganmobileservice.com/


Image

“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams

http://www.youtube.com/user/reelrazor
Post Reply