fixed voltage regulator, charged battery, kick stand up, front yellow signals lit, no accesory lights lit, wont let me start bike, i tilt/shake the bike and accesory light sometime will light up n i can start bike, choke, let idle, purrs like kitten, as soon as i sit on bike or move it at all the bikes cuts itself off n no accesory light, thinking loose cable, bad fuse or corrosion.... got motorcycle license today and really want to ride, i have side and rear plastics off of bike
thank you
PLEASE HELP
electrical issue please help
Moderators: Site Director, FZR Forum Moderators
-
- Site Newbie
- Posts: 6
- Joined: Sun Sep 08, 2013 1:28 pm
- Location: 410
- Kevadlilleke
- 100+ Posts
- Posts: 113
- Joined: Mon Sep 03, 2012 3:38 pm
- Location: Estonia
Re: electrical issue please help
What's an accessory light? Just curious...
1990 FZR 1000, 1993 engine, terrible state... but improving.
[Project thread] The Yellow FZR - 1990/1993 FZR1000
2012
2013
2014 
[Project thread] The Yellow FZR - 1990/1993 FZR1000
2012
- Kevadlilleke
- 100+ Posts
- Posts: 113
- Joined: Mon Sep 03, 2012 3:38 pm
- Location: Estonia
Re: electrical issue please help
Based on viewtopic.php?f=8&t=11232 I'd assume you have some loose connectors or broken cables.
1990 FZR 1000, 1993 engine, terrible state... but improving.
[Project thread] The Yellow FZR - 1990/1993 FZR1000
2012
2013
2014 
[Project thread] The Yellow FZR - 1990/1993 FZR1000
2012
-
- Site Newbie
- Posts: 6
- Joined: Sun Sep 08, 2013 1:28 pm
- Location: 410
Re: electrical issue please help
I FIXED IT, CUT IGNITION WIRE, SPLICED IT, NOW JUST GOTTA TAPE IT, COMPLETELY FIXED IT THANK YOU SO MUCH
NOW IM RUNNING INTO ISSUE WHERE IT INDICATOR LIGHT SAYS THAT MY HIGH BEAMS R ON WHEN THEY ARE OFF, THAT NEEDS TO BE FIXED BEFORE I CAN PASS INSPECTION... ANY IDEAS
NOW IM RUNNING INTO ISSUE WHERE IT INDICATOR LIGHT SAYS THAT MY HIGH BEAMS R ON WHEN THEY ARE OFF, THAT NEEDS TO BE FIXED BEFORE I CAN PASS INSPECTION... ANY IDEAS
Re: electrical issue please help
take switch apart (handlebar unit) clean and apply dielectric grease
http://www.michiganmobileservice.com/

“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor
“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor