Neutral problems.

[Gh0sT21]

Hy guys, I got a fzr 600, 91` and I have a neutral problem.
So I was coming home from a short ride, and when I stopped in front of my house I noticed the neutral blinked, and I shifted in first and it stopped. I had this problem again but, that was when the season started, and then I was in gear (second If I remember well) I tried to give a little gas and it began to stall after shifting back to first and playing with the clutch a little, it worked well, the "neutral blink" had stopped and the bike runned well. I don`t know what could cause this problem. Please help.

[Kevadlilleke]

Have you measured the neutral switch output, when the light is blinking?

[Gh0sT21]

I can`t because when I release the clutch the bike stalls

[DonTZ125]

Check for security and condition of your connections at the neutral, clutch, and sidestand switches, as well as at the TCI and main relay assembly.

[yamaha_george]

Hi,
most likely corroded connections on the safety switches mentioned by Don as they are close to all the crap from the road & chain.

[Gh0sT21]

Thanks for the replies I clean, those wires, I check the connections and everything look fine. If I will have this happening again I will let you know. Thanks everybody

[yamaha_george]

Thanks for the replies I clean, those wires, I check the connections and everything look fine. If I will have this happening again I will let you know. Thanks everybody

G,
you are welcome, that is why this Forum exists