Buying a 91 FZR ?

Moderators: Site Director, FZR Forum Moderators

Post Reply
Ronnie_D
Site Newbie
Posts: 2
Joined: Sun Apr 15, 2012 2:15 pm
Location: Canada

Buying a 91 FZR ?

Post by Ronnie_D »

Hello All:
I am thinking about buying a 1991 FZR 1000 basket case. The original motor burns oil so the owner has picked up a low mileage 96 YZR 1000 motor. I am wondering if this 96 YZR motor will drop in without any major hassles?

cheers, :cheers:
Ronnie.
User avatar
Stig
Level 3.5
Level 3.5
Posts: 398
Joined: Mon May 10, 2010 8:11 am
Location: Nottinghamshire UK
Contact:

Re: Buying a 91 FZR ?

Post by Stig »

ony issue will be the top mount on the cylinder head. I believe theres only 1 on the ACE whereas 2 on the FZR. Its possible to swap the heads over whilst keeping everything else
If its not broken it dont need fixing

http://www.exup1000.co.uk
Ronnie_D
Site Newbie
Posts: 2
Joined: Sun Apr 15, 2012 2:15 pm
Location: Canada

Re: Buying a 91 FZR ?

Post by Ronnie_D »

Thank you for your help
Ron :tks:
dan83590
50+ Posts
50+ Posts
Posts: 67
Joined: Sun Jun 05, 2011 7:51 am
Location: Bristol ish

Re: Buying a 91 FZR ?

Post by dan83590 »

Stiggy is right.

The oil burning engine probably has buggered piston rings and bores so you would not want those. Ideally you would want (I believe) the FZR barrels, with the YZF's forged pistons. Could that be done? I'm thinking of doing something similar.

Failing that you could maybe have some sort of bracket fabricated but then I reckon the problem would be the fact that the engine on these bike forms part of the frame structure. Put two brackets into the mix and it may fcuk up frame rigidity.
Post Reply