92 fzr600 airbox removal
Moderators: Site Director, FZR Forum Moderators
-
dayalalito
- 50+ Posts

- Posts: 54
- Joined: Wed Sep 21, 2011 9:12 pm
- Location: us
92 fzr600 airbox removal
so i read around and it says that if i remove my airbox and install the 4 mini K&N filters that i have to adjust the carbs, is that true or is it just a bolts on and leave the carbs

thanks Dayalalito
Re: 92 fzr600 airbox removal
I would wager that every thread you've found on this board or the Archives involves a discussion of how much effort is required in re-jetting for pod filters. Why would you ask if it's a drop-in modification?
YG's suggestions about throat length and stand-off tubes makes it easier, but there is still a significant change in air flow, and thus jetting.
YG's suggestions about throat length and stand-off tubes makes it easier, but there is still a significant change in air flow, and thus jetting.
1989 3LN1 FZR250R, currently stock.
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
-
dayalalito
- 50+ Posts

- Posts: 54
- Joined: Wed Sep 21, 2011 9:12 pm
- Location: us
Re: 92 fzr600 airbox removal
Just wanted to now if it becomes difficult then I will leave
The airbox in there and not get the mini filters
The airbox in there and not get the mini filters
thanks Dayalalito
- fzrbrandon
- Level 7.5

- Posts: 762
- Joined: Mon Oct 06, 2008 3:21 pm
- Location: North Hollywood, CA
- Contact:
Re: 92 fzr600 airbox removal
Save yourself a HUGE headache and just stick with the airbox. This bike puts out WAAAAAAAAY more than enough useable power for the street with the stock set-up. I get that people like to tinker but unless you're on the track and trying to squeeze out a couple extra ponies to win the next race (class rules premitting) and your technique is the best that it can be, there's not a lot to gain from this.
(putting on flame retardant suit...)
(putting on flame retardant suit...)

92 FZR600 - 3EN2 400 swingarm, Micron, DynoJet, Factory Pro, K&N, R6 shock, RT springs/emulators, R6 MC, Galfer, YZF calipers, Vortex, RK, YZF/R6 VR/R, Vortex, Zero Gravity
90 FZR400 - Sharkskinz, D&D, Sudco, DynoJet, Factory Pro, Ohlins, RT springs/emulators, JEM Machine, Woodcraft, NRC, Galfer, Vortex, RK, YZF/R6 VR/R, Vortex, Lockhart Phillips
89 FZR600 - Vance & Hines, DynoJet, Zero Gravity - sold in '91
http://www.fzrbrandon.com
!!! 400 & 600 Parts For Sale !!! viewtopic.php?f=18&t=9971