running rough

Moderators: Site Director, FZR Forum Moderators

Post Reply
mr5liter35180
Site Newbie
Posts: 2
Joined: Tue Feb 16, 2010 7:41 am

running rough

Post by mr5liter35180 »

just bought a 88 1000 and the guy says it will not idle without choke on and it will not rev past 8000 anybody have any suggestions where to start. it ran fine before i remember when he used to ride it and he said it all just started all of a sudden one day.he said he just came outside one day and was acting up any help would be greatly appreciated.
sweekster
2000+ Posts
2000+ Posts
Posts: 2773
Joined: Tue May 13, 2008 10:52 am
Location: Perris, CA

Re: running rough

Post by sweekster »

I would pull the carbs and give them a cleaning.
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD

Image


THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
mr5liter35180
Site Newbie
Posts: 2
Joined: Tue Feb 16, 2010 7:41 am

Re: running rough

Post by mr5liter35180 »

well i have concluded it is the carbs but no shops around here will even look at it they say its to old any help would be great. i can get them off i am familiar with carbs just not multiple carbs do i do anything different. if i take them off will i get them out of sync?
DonTZ125
Moderator
Posts: 2214
Joined: Tue Dec 02, 2008 11:20 pm
Location: Scarberia, ON
Contact:

Re: running rough

Post by DonTZ125 »

You can dismount and strip the carbs for cleaning without separating the bodies, but they're badly due for a re-synch anyway...
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: running rough

Post by yamaha_george »

DonTZ125 wrote:You can dismount and strip the carbs for cleaning without separating the bodies, but they're badly due for a re-synch anyway...
Hi,
There are loads of stuff on the forum & WIKI on this subject even down to making your own Synch tool, read those thro first then if you are not sure on some point we are here.

1 tip do one carb clean at a time some times 2 & 3 are jetted slightly different to 1 & 4
Post Reply