YZF SWINGARM SWAP..... DONE!

[tampaFZR600]

heres the sku # for the bearings ...BEARING,CYL.#20
360538-001

sweet, this is exactly what i needed to know. thanks man.

[tampaFZR600]

OK! I got the gold 520 chain from bmiller for 50 bucks and a rear 47t 520 JT sprocket at motorcyclesuperstore for 34 bucks. SAAAWWEEEET. THanks fellas!
....still need the bearings.....expensive bitches....

Going to go do my swingarm now woot!

[jax]

OK! I got the gold 520 chain from bmiller for 50 bucks and a rear 47t 520 JT sprocket at motorcyclesuperstore for 34 bucks. SAAAWWEEEET. THanks fellas!
....still need the bearings.....expensive bitches....

Going to go do my swingarm now woot!

Cool. meausre twice cut once. I cut .375 off of each end. Make sure you use a machinist ruler in the 100th scale to accurantely make tyour marks.

[tampaFZR600]

Well, i went to etch the lines today, and the clamps worked perfect...here are some pictures of the clamps and then the lines without the clamps, look pretty strait! I measured with a micrometer to .375 or 3/8" on each side. From line to line, 8.5"----MONEY! Then i thought...well, i can get out the cutting wheel and cut around this circle....... OR i can go back to my old shop and have a buddy (that is very good on the band saw) buzz these ends off in .2 seconds. So i called him up and he said the boss is out tomorrow so he can do it at lunch AND he's gonna sandblast it for me! YEEEYAAA!

[tampaFZR600]

Good to see the progress! I'm shipping you that chain first thing in the AM.

Thanks again man!

[fzraudun]

I'm doing the same conversion and I'm just wondering;

Are the rear sprockets of all YZF 600 94-02 the same?
Wich year 636 front sprocket fits?
And where to buy cheapest?

[tampaFZR600]

I'm doing the same conversion and I'm just wondering;

Are the rear sprockets of all YZF 600 94-02 the same?
Wich year 636 front sprocket fits?
And where to buy cheapest?

EVERYTHING you need to know is in these three links, I read and re-read each of them MANY times, and feel like i'm a pro now.

viewtopic.php?f=30&t=2851
viewtopic.php?f=30&t=563
viewtopic.php?f=30&t=178

to more directly answer your question, i believe the years are 95-07 for the yzf swing.
03-06 zx6r 636 front sprocket, http://www.denniskirk.com cheapest
also, you need to get a 520 chain and change the YZF stock 530 sprocket to a 520 sprocket

have fun!

[jax]

I'm doing the same conversion and I'm just wondering;

Are the rear sprockets of all YZF 600 94-02 the same?
Wich year 636 front sprocket fits?
And where to buy cheapest?

1. Yes......You can use a FZR 520 sprocket if your currently have one but just open up the bolt holes a bit.

2. JT1307 is the one you want. ( 14 or 15 tooth your preference )


3. Ebay has them for about 22 shipped. Years and models are in the pics below. 1st link below is for the 14 tooth ( one I got ) the second is for the 15 tooth. I beleive they have a 13 tooth also.
http://cgi.ebay.com/ebaymotors/JT-Front ... ccessories

http://cgi.ebay.com/ebaymotors/JT-Front ... ccessories

[jax]

I'm doing the same conversion and I'm just wondering;

Are the rear sprockets of all YZF 600 94-02 the same?
Wich year 636 front sprocket fits?
And where to buy cheapest?

1. Yes......You can use a FZR 520 sprocket if your currently have one but just open up the bolt holes a bit.

2. JT1307 is the one you want. ( 14 or 15 tooth your preference )


3. Ebay has them for about 22-23 shipped. Dennis Kirk has them for about 28-29 shipped. Ebay makes more sense. Years and models are in the pics below. 1st link below is for the 14 tooth ( one I got ) the second is for the 15 tooth. I beleive they have a 13 tooth also.
http://cgi.ebay.com/ebaymotors/JT-Front ... ccessories

http://cgi.ebay.com/ebaymotors/JT-Front ... ccessories

[tampaFZR600]

I stand corrected. I paid 26 on dennis kirk. that one on ebay is cheaper

[war2008]

real quick, 2007 r6 swingarm "doable" on 92/600 ?

[war2008]

going to go pick up a 05 swinger for 40 bucks, no hardware....worth it?

[tampaFZR600]

going to go pick up a 05 swinger for 40 bucks, no hardware....worth it?

YZF600 or R6?....i guess it doesn't really matter, either would be an ok deal i think.
on ebay you can get a R6 or Y600 for $50-$100 shipped, some with extra parts, so i would check that out.

[war2008]

http://cgi.ebay.com/ebaymotors/ws/eBayI ... &viewitem=

This auction is for an OEM rear wheel swingarm for the 2003 - 2005 Yamaha YZF600R6. This is the OEM unit and it should fit the R6 of any year,

[tampaFZR600]

OOO yea, so i got my ignition and key set from thatkid yesterday, and also got my swingarm CUT and blasted
My friend said its 1/32 OVER, so thats PERFECT,I have a tiny bit to work with...