Hi,
http://www.jaylenosgarage.com/video/vid ... vid=944641
Enjoy
GEARHEADS:- Nifty kit for the SERIOUS modder
Moderators: Site Director, FZR Forum Moderators
-
yamaha_george
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: GEARHEADS:- Nifty kit for the SERIOUS modder
That is bad ass. I've used 3D printers but they where gypsum based not ABS plastic based. The one in they showed is about half the cost of the gypsum printer I've used as well. I would love to get one of those scanners.
Yes, that is a Single Sided Swingarm FZR600 that I built.
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Re: GEARHEADS:- Nifty kit for the SERIOUS modder
insane!
I did that.
"(12:38:42) sweekster: i work when i want because i'm sweeks"
"(12:38:42) sweekster: i work when i want because i'm sweeks"
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: GEARHEADS:- Nifty kit for the SERIOUS modder
I got both of those exact machines here at my school.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: GEARHEADS:- Nifty kit for the SERIOUS modder
Ummm wanna make me some stuff??megaloxana wrote:I got both of those exact machines here at my school.
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
-
yamaha_george
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: GEARHEADS:- Nifty kit for the SERIOUS modder
M.megaloxana wrote:I got both of those exact machines here at my school.
you jammie B* stard (which english speak for you Lucky SOB.) do get to play any? I did a course in the early 90's with a fanuck controlled vert miller made some exotic bits for the RD's
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: GEARHEADS:- Nifty kit for the SERIOUS modder
You can actually make your own 3D scanner using a free program, a webcam, a laser pointer, and some stuff from a craft store.
Not so much with the 3D scanner, but the the printer yes. The other week I printed out a milling jig and it took 36 straight hours of printing. Unfortunatly those 3D printers aren't the most reliable things and break down often. We have a few different printers actually, ABS plastic, wax, and two more that use powder corn starch(they do color prints).yamaha_george wrote:M.megaloxana wrote:I got both of those exact machines here at my school.
you jammie B* stard (which english speak for you Lucky SOB.) do get to play any? I did a course in the early 90's with a fanuck controlled vert miller made some exotic bits for the RD's
Depends what you want. I could probably throw in some smaller things. The fact is that ABS material isn't the cheapest stuff. Granted the printers cost ridiculous amounts.thatkid wrote:Ummm wanna make me some stuff??megaloxana wrote:I got both of those exact machines here at my school.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
-
chefen2006
- Level 3.5
- Posts: 390
- Joined: Mon Jun 09, 2008 1:51 am
- Location: Mijas Costa, Malaga, Spain.
Re: GEARHEADS:- Nifty kit for the SERIOUS modder
Take it easy. In a few years we will all have a "plug in to the computer"model of this gizmo. I hope...