I win! (2.1megs worth of pictures)
Moderators: Site Director, FZR Forum Moderators
I win! (2.1megs worth of pictures)
I am officially the largest home parts supplier of FZR parts. Check out this score I just nabbed up for 200 bucks on craigslist.
(Props go out to Dillon for finding it and for picking it up for me and bringing it down)
Let the picture whoring commence!
FZR race tail and tank cover. Both are fiberglass although I don't know by whom. They are thick though. No 2 or 3 layer here.
From here they are mostly YZF600 parts.
While they are bent, the rim and rotors are still good. I'm sure some internals are alright as well and the lower fork tubes.
R1 tail and front seat
It had some dents but the repair job is pretty nice. Need a little touch in two very small spots about 2-3mm wide but otherwise just needs paint.
Wait...is that an ENTIRE set of YZF600 plastics in very good condition? Oh it is. I've only found one section that is broken but it was a clean break and could easily be plastic welded.
This didn't come in this lot but I'm going to have it for sale shortly. I think the bike was started but never actually moved while this exhaust was on. It's mint. I'll polish it before shipping. $170 shipped.
This isn't for sale but I just bought it. Nothing super special, just a standard tank pad. Should go well with the bike though.
I won this on ebay. I'll powdercoat it any color the buyer chooses once I get it stripped of the factory paint.
That is it for pictures. It is a crazy amount of stuff and pretty much all of it is for sale so feel free and make offers. I'll be posting it in the for sale section soon. Some of it will have pricing and some of it will just have to be an offer because there is way too much to figure pricing for all of it.
(Props go out to Dillon for finding it and for picking it up for me and bringing it down)
Let the picture whoring commence!
FZR race tail and tank cover. Both are fiberglass although I don't know by whom. They are thick though. No 2 or 3 layer here.
From here they are mostly YZF600 parts.
While they are bent, the rim and rotors are still good. I'm sure some internals are alright as well and the lower fork tubes.
R1 tail and front seat
It had some dents but the repair job is pretty nice. Need a little touch in two very small spots about 2-3mm wide but otherwise just needs paint.
Wait...is that an ENTIRE set of YZF600 plastics in very good condition? Oh it is. I've only found one section that is broken but it was a clean break and could easily be plastic welded.
This didn't come in this lot but I'm going to have it for sale shortly. I think the bike was started but never actually moved while this exhaust was on. It's mint. I'll polish it before shipping. $170 shipped.
This isn't for sale but I just bought it. Nothing super special, just a standard tank pad. Should go well with the bike though.
I won this on ebay. I'll powdercoat it any color the buyer chooses once I get it stripped of the factory paint.
That is it for pictures. It is a crazy amount of stuff and pretty much all of it is for sale so feel free and make offers. I'll be posting it in the for sale section soon. Some of it will have pricing and some of it will just have to be an offer because there is way too much to figure pricing for all of it.
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
Re: I win! (2.1megs worth of pictures)
nice find!
89 FZR 400
Custom Paintjob
600 plastics.
06 - R6 Shock
FZR600 Motor
Polished Frame & Engine Covers
Soon to be:
Broke........
FZROnline.com Decals. Get yours Now!!!
Custom Paintjob
600 plastics.
06 - R6 Shock
FZR600 Motor
Polished Frame & Engine Covers
Soon to be:
Broke........
FZROnline.com Decals. Get yours Now!!!
Re: I win! (2.1megs worth of pictures)
Hey, I have no problem crafting you into a bigger FZR parts whore than you already are.
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
- megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: I win! (2.1megs worth of pictures)
its a good thing you're not married...
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: I win! (2.1megs worth of pictures)
Haha, yeah. I need to start clearing some stuff out though. It's getting a bit nuts down there. Two full sets of plastics and then some and like 7 wheels.megaloxana wrote:its a good thing you're not married...
I think I'm married to my FZR and she keeps getting new clothes.
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
Re: I win! (2.1megs worth of pictures)
haha, at YOUR expense too
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: I win! (2.1megs worth of pictures)
You did win! Cant think of anything I need though. What kind of exhaust can (black)is that?
Re: I win! (2.1megs worth of pictures)
Stock YZF. Weighs 100 lbs.... srsly tho95FZR600 wrote:You did win! Cant think of anything I need though. What kind of exhaust can (black)is that?
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: I win! (2.1megs worth of pictures)
Dillon isn't kidding. That thing is freaking heavy.
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
Re: I win! (2.1megs worth of pictures)
If anyone knows anyone with a YZF that wants to replace their plastics or buy up a second set, those are the main thing I need to get rid of right away. They take up way too much space to keep them for any length of time. Will probably post them on the yzf forum shortly unless someone here wants them.
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
-
- 50+ Posts
- Posts: 61
- Joined: Fri May 09, 2008 1:28 am
- Location: Buffalo, NY
- Contact:
Re: I win! (2.1megs worth of pictures)
Just for a quick clarification, just the V&H can is for $170, right?
'94 FZR600
(Light) MODS:
Vance and Hines SSR2 Slip-on
Airtech R1 Body Conversion
Re: I win! (2.1megs worth of pictures)
94fzr600convert wrote:Just for a quick clarification, just the V&H can is for $170, right?
Correct, $170 shipped. I believe they run $240 new and this is pretty much the newest looking one you're going to get without buying it new. It's seriously mint!
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
- DEMORAL1ZE
- 100+ Posts
- Posts: 141
- Joined: Mon Oct 13, 2008 10:32 am
- Location: SOUTHEAST MISSOURI--------LAND OF THE FREE, HOME OF THE BRAVE
Re: I win! (2.1megs worth of pictures)
PM sent.......oh yeah....
YOU CAN TWIST PERCEPTION BUT REALITY WON'T BUDGE
Re: I win! (2.1megs worth of pictures)
the black exhaust thats obviously aftermarket(atleast the header is) and the race tail have me very intersted nate
pm me.
you definitely have more than I do as I am slowly thinning my horde and you keep adding!
maybe I have some random BS you want...?
pm me.
you definitely have more than I do as I am slowly thinning my horde and you keep adding!
maybe I have some random BS you want...?
93 Yamaha FZR 600 - Track Project
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
Re: I win! (2.1megs worth of pictures)
93 Yamaha FZR 600 - Track Project
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary