yzf master cylinder and brakes ?????

[abs929cbrrr]

5-10 mins max to blead brakes manualy. pump for about 5 mins open up the bleeder screw while you are pressing the lever down and air will come out...do it until ya got a steady stream and here no more pop sounds. refill the rezzy.

its really not hard.

[PIMPMYFZR]

finally think i got it but have togo work now tryi it later

[cad600]

You may have gotten an air bubble into the M/C. I tied the brake lever down to the clip-on and bled the brakes that way. Wasn't the most correct way of doing it, but it worked.

Nice part about radial master cylinders - they have bled screws on the them, not just at the calliper.

[yamaha_george]

You may have gotten an air bubble into the M/C. I tied the brake lever down to the clip-on and bled the brakes that way. Wasn't the most correct way of doing it, but it worked.

Nice part about radial master cylinders - they have bled screws on the them, not just at the calliper.

CAD,
The idea is spot on, as to radial M/c and bleed nipples , ANY M?C can be fitted with them it is just a case of loosen the purse strings and buy one for about 12USD and SAVE all the bleeding problems :-}

I have been using them for years and would not go go back even if it meant missing a ride, !!!!

[PIMPMYFZR]

I didn't even see the bleed nipple. On the MC just loosened it up at the banjo heard a pshh tighten backed up didn't even need the pump after that

[shredex]

what is that cable going to the middle of the wheel??

[sweekster]

what is that cable going to the middle of the wheel??

It's the speedo cable. If i remember correctly your bike has a digital gauge swap done so you don't need one.

[megaloxana]

I can't wait to get mine installed.

[yamaha_george]

I didn't even see the bleed nipple. On the MC just loosened it up at the banjo heard a pshh tighten backed up didn't even need the pump after that

PMF,
see listen to your "uncle" George you will not go far wrong

[PIMPMYFZR]

I know George , i know ! .. im the hard headed type .. just my luck things never go right the first time .. but for real though .. thanks for all the advise and expertise .. your a valuable asset to have on this forum ..

[yamaha_george]

I know George , i know ! .. im the hard headed type .. just my luck things never go right the first time .. but for real though .. thanks for all the advise and expertise .. your a valuable asset to have on this forum ..

PMF,
If you never made mistakes there would be no learning, so I guess i have made plenty LoL

I appreciate the thanks for my input , it gives me fodder to give the shrink about what a nice guy I am

[95FZR600]

I know George , i know ! .. im the hard headed type .. just my luck things never go right the first time .. but for real though .. thanks for all the advise and expertise .. your a valuable asset to have on this forum ..

PMF,
If you never made mistakes there would be no learning, so I guess i have made plenty LoL

I appreciate the thanks for my input , it gives me fodder to give the shrink about what a nice guy I am

Hahaha. I heard that. Really, unless you screw it up once you will never learn. I just remember being around my father and him showing me how to fix things and most of that stuff stayed with me. Every now and then I still call him to ask for help whether I need it or not. Most of the time just to talk about the problem and Im sure that makes him feel good.

[yamaha_george]

. Most of the time just to talk about the problem and Im sure that makes him feel good.

PMF,
he probably believes as I do that at our age we have been around long enough to have learnt something and to save you youngsters some grief we should pass that knowledge on.
And yes it is a good feeling, most of society thing we are just a bunch of old duffers and when we get a result it is nice to know we are not quite on the scrap heap yet LoL