my bike is thrashed looking at options.

[Internetaardvark]

Have some questions. So I currently have a 94 fzr 600 and would be fine riding that but as some of you may remember i went down pretty good a little while back and in addition to taking off my front fairing, guages headlight etc, I noticed the other day that the tail is tweaked... like about 1-2 inches. So im starting to think its time to retire this one . Unfortunately i don't have alot of money right now I really don't wanna spend it on a new bike was planning on waiting and saving up till the end of next season. Can i tweak the tail back in? Or at this point as something i'm sitting on going 70 plus is it just plain not safe? there are a couple of bikes on ebay and i was looking at a yzf 600. How do they compare to the fzr? I know there heavier and faster but do they handle as well? Better? Any one thats ridden both i'd appreciate your imput.
Thanks, guys.

[Dr Rockso]

if only the tail is tweaked why don't you just weld on a subframe from another bike and use some other tail ? it's cheaper than a new bike .

[abs929cbrrr]

I think the yzf600r is a heavy bike, more weight and only a little more power.

[megaloxana]

I think the yzf600r is a heavy bike, more weight and only a little more power.

and ugly

[NHFZR600]

im tellin you Dave you should buy my bike!!!!!!

[YAM93]

re-bend the subframe as straight as you can get it by wedging a long 2x4 in there and use it as a lever-arm. If it will fit. If it's far enough off affect the way you're sitting in the seat or look really bad you may be S.O.L.