how bad is it gonna suck to replace it? kinda looks like a PITA but
YAY!
Moderators: Site Director, FZR Forum Moderators
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: YAY!
shouldn't be too bad. Take off your fairings, unbolt the radiator and you should be able to get to it.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
-
demon_knight69
- Level 4.5
- Posts: 488
- Joined: Sat May 10, 2008 9:49 am
- Location: Mesa, Arizona
Re: YAY!
its not that hard, trust me. after ripping through the rest of the engine, its a walk in the park. the valve cover gasket is hopefully one of the last parts i need to get the bike back up and running. just ordered it from bike bandit, i think it was $33.1996 FZR 600
Custom exhaust made from R6 header and GSXR600 end pipe
K&N Pods
Barnett Clutch
Factory Pro shift kit
Needs paint and on her way to being a streetfighter
Custom exhaust made from R6 header and GSXR600 end pipe
K&N Pods
Barnett Clutch
Factory Pro shift kit
Needs paint and on her way to being a streetfighter
-
mxryder21
- Level 1.5
- Posts: 195
- Joined: Mon May 12, 2008 6:53 pm
- Location: Las Vegas, NV & Gilroy, CA
Re: YAY!
nice. i have had this damn oil leak for a while and i thought it was my oil pan gasket because the front of it always had a little oil on it. little did i know it was leaking from the valve cover gasket, running down the engine and collecting on the oil pan. $33 aint that bad. i just bought a new oil pan and gasket too from v8killaz. guess i better change out as much as i can while the bike is torn apart.demon_knight69 wrote:
but are copper or aluminum exhaust gaskets better?1993 YZFZR61 ***UNDER CONSRUCTION***
Re: YAY!
hey i have brand new valve cover gasket too
