everyones input on FZR-R1 conversion
Moderators: Site Director, FZR Forum Moderators
everyones input on FZR-R1 conversion
im on the vurge of ordering this kit...before i do i wanna find out more about it...like what the overall opinion on it.. the more input the better,
http://motobody.com/yamaz/fzrr1conversion.htm
http://motobody.com/yamaz/fzrr1conversion.htm
Re: everyones input on FZR-R1 conversion
depends on how you paint it
93 Yamaha FZR 600 - Track Project
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
Re: everyones input on FZR-R1 conversion
I say go this route
I haven't heard very many good things about that kit. The quality isn't the best and things like that. A lot of people have the tail conversion and that looks cool. That's 90ca18det's bike above it once had the whole kit on it and it looks much better the way it is now.
I haven't heard very many good things about that kit. The quality isn't the best and things like that. A lot of people have the tail conversion and that looks cool. That's 90ca18det's bike above it once had the whole kit on it and it looks much better the way it is now.
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Re: everyones input on FZR-R1 conversion
i think ill go with flat black....and polished rims.... flashyness is not what im going for.... i was at a bike shop yesterday, and saw a full race ducati....omfg..... it was flat black, polished wheels,sticker kit... thats kinda what im going for..
Re: everyones input on FZR-R1 conversion
I say do something original. Get in touch with your inner nonconformist. Unleash him on the bike.
It's just that ever R6/R1 on the road looks the same. Why try and join that crowd? You don't have to be flashy to stand out. That's my
It's just that ever R6/R1 on the road looks the same. Why try and join that crowd? You don't have to be flashy to stand out. That's my
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
Re: everyones input on FZR-R1 conversion
I have this entire kit from airtech. I can send you pics of whatever you need.
1. The fiberglass is thin and very uneven
2. Whoever finished sanding mine at airtech should get some glasses
3. the few mounts that they do put in there for you are slightly off and prone to break due to thin glass.
3. The headlight they come with is an aircraft marker light and an odd size and you wont be able to ride at night with only that light (at least I couldnt) nor could I find a replacement locally. (I cut the back out of the light with a diamond blade and jbwelded one of those fake HID blue car halogens
4. I'm selling mine off this winter if you want to hold out and spend half of what they want.
I bought my bike with the kit on already but if I had spent the 900ish that a new kit cost and gotten what I have I would have been so pissed off it wouldnt have been funny
1. The fiberglass is thin and very uneven
2. Whoever finished sanding mine at airtech should get some glasses
3. the few mounts that they do put in there for you are slightly off and prone to break due to thin glass.
3. The headlight they come with is an aircraft marker light and an odd size and you wont be able to ride at night with only that light (at least I couldnt) nor could I find a replacement locally. (I cut the back out of the light with a diamond blade and jbwelded one of those fake HID blue car halogens
4. I'm selling mine off this winter if you want to hold out and spend half of what they want.
I bought my bike with the kit on already but if I had spent the 900ish that a new kit cost and gotten what I have I would have been so pissed off it wouldnt have been funny
1992 FZR 600
Yoshi exhaust
K&N pods
Airtech R1-kit
02 R6 fork swap
02 R6 Swingarm
520 chain conversion
07 R6 controls
Vortex R6 clipons
07 R6 radial master
2003 CBR 600rr
bone stock
Re: everyones input on FZR-R1 conversion
I started off with the airtech kit on my bike and for a while it was okay.If you do get the kit be forewarned that the single head lamp sucks badly.That is one of the main reasons that I went with the 2001 R1 front fairing.You will also have a good many fitment issues(it is not as easy as the airtech website makes it out to be).Also it tends to spiderweb the gelcoat very easy.I am not trying to steer you away from it,just letting you know what I found with mine.
Re: everyones input on FZR-R1 conversion
I'll steer you away! RUN. Their kit is crap.
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
Re: everyones input on FZR-R1 conversion
I had the Airtech Tail , Rear wheel hugger and front fender , my tail is cracked in more then 5 places , my rear wheel hugger has help up and my front fender looked to nice after i got it painted that i only rode on it like couple miles and took it off , was afraid it would crack also ...
Me personally if i knew then what i know now i would have gone with this
http://cgi.ebay.com/ebaymotors/Parts-Ac ... 06.c0.m245
and just made my mounts as i went along , bought the headlights and bam probably wouldnt spend 900 on a kit , but you can source everything cheaper honestly
just have to keep an eye out and have PLENTY of time ..goodluck
Me personally if i knew then what i know now i would have gone with this
http://cgi.ebay.com/ebaymotors/Parts-Ac ... 06.c0.m245
and just made my mounts as i went along , bought the headlights and bam probably wouldnt spend 900 on a kit , but you can source everything cheaper honestly
just have to keep an eye out and have PLENTY of time ..goodluck
2002 R1 9k miles , Hotbodies undertail , Chopped Hindle Hi Mount , Solo Seat cowl,Frame sliders, little yellow yamaha wheel stickers .hehe
94' 600RR SOLD**
hid xenon
airtek solo tail
time for a 1000
R.I.P DaD 2/17/09 Your in my <3 always
Re: everyones input on FZR-R1 conversion
That is exactly what I did.I bought the R1 fairing piece by piece and then assembled it all.
- shredex
- 2000+ Posts
- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: everyones input on FZR-R1 conversion
the tail is fine. I would not recomend any of the other parts, but your better off paying $50 for a new r6 tail fairing than $200 for the airtech
Re: everyones input on FZR-R1 conversion
i doubt you can find a new R6 tail fairing for $50 , unless it's Rashed , Scratched, or Cracked and then you still have to buy the tailight and seat but for a pretty much str8 swap for somone who's less inclined i think the airtech tail is perfect swap out just a lil bit outdated .. you would think the people at airtech or other companys would use their heads and mold another one-off tailshredex wrote:the tail is fine. I would not recomend any of the other parts, but your better off paying $50 for a new r6 tail fairing than $200 for the airtech
I wish i knew how todo it , i would be mass producing it and sellin to every fzr owner thats looking to modify the rear end
2002 R1 9k miles , Hotbodies undertail , Chopped Hindle Hi Mount , Solo Seat cowl,Frame sliders, little yellow yamaha wheel stickers .hehe
94' 600RR SOLD**
hid xenon
airtek solo tail
time for a 1000
R.I.P DaD 2/17/09 Your in my <3 always
Re: everyones input on FZR-R1 conversion
Its a lot of damn work. A lot of cutting! Someone made a video of the whole process and didnt look easy.
- shredex
- 2000+ Posts
- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: everyones input on FZR-R1 conversion
found an 05 r6 tail in perfect condition on criegslist for $10.PIMPMYFZR wrote:
i doubt you can find a new R6 tail fairing for $50 , unless it's Rashed , Scratched, or Cracked and then you still have to buy the tailight and seat but for a pretty much str8 swap for somone who's less inclined i think the airtech tail is perfect swap out just a lil bit outdated .. you would think the people at airtech or other companys would use their heads and mold another one-off tail
I wish i knew how todo it , i would be mass producing it and sellin to every fzr owner thats looking to modify the rear end
i might pick it up tomorrow
Re: everyones input on FZR-R1 conversion
shredex wrote:found an 05 r6 tail in perfect condition on criegslist for $10.PIMPMYFZR wrote:
i doubt you can find a new R6 tail fairing for $50 , unless it's Rashed , Scratched, or Cracked and then you still have to buy the tailight and seat but for a pretty much str8 swap for somone who's less inclined i think the airtech tail is perfect swap out just a lil bit outdated .. you would think the people at airtech or other companys would use their heads and mold another one-off tail
I wish i knew how todo it , i would be mass producing it and sellin to every fzr owner thats looking to modify the rear end
i might pick it up tomorrow
You better jump on that!