Geographic map of members' locations

Moderators: Site Director, FZR Forum Moderators

Modified96
50+ Posts
50+ Posts
Posts: 68
Joined: Sun May 11, 2008 7:15 pm
Location: Stillwater, OK

Re: Geographic map of members' locations

Post by Modified96 »

http://www.frappr.com/fzronline

After you click the link you will notice a world map. On the left hand side the is a button that says Add me(or something like that). After click it you will notice a pop-up on the map that ask your name, location, email and user image. Now you can fill out the needed information and it will add you to the map.

Hope that helps.
"There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die." - Fear and Loathing
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: Geographic map of members' locations

Post by yamaha_george »

bweight wrote:bah.. keeps crashing when I try to add myself..

I'll keep checking to see if I can get my location in there.. if not, I'll try to see if there's another map system out there that I can put on the page..
BAH HUMBUG it is written in adungi Flash canofworms which does not under stand linux systems for installing banghead
User avatar
tommyj27
Level 9.5
Level 9.5
Posts: 970
Joined: Wed May 07, 2008 10:59 am
Location: Minneapolis, MN

Re: Geographic map of members' locations

Post by tommyj27 »

yamaha_george wrote:
bweight wrote:bah.. keeps crashing when I try to add myself..

I'll keep checking to see if I can get my location in there.. if not, I'll try to see if there's another map system out there that I can put on the page..
BAH HUMBUG it is written in adungi Flash canofworms which does not under stand linux systems for installing banghead
It works fine for me. IDK
User avatar
haunter
2000+ Posts
2000+ Posts
Posts: 2266
Joined: Fri May 09, 2008 9:17 am
Location: Urbana, Il USA
Contact:

Re: Geographic map of members' locations

Post by haunter »

adding myself as we speak!
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: Geographic map of members' locations

Post by yamaha_george »

tommyj27 wrote:
yamaha_george wrote:
bweight wrote:bah.. keeps crashing when I try to add myself..

I'll keep checking to see if I can get my location in there.. if not, I'll try to see if there's another map system out there that I can put on the page..
BAH HUMBUG it is written in adungi Flash canofworms which does not under stand linux systems for installing banghead
It works fine for me. IDK

PM sent
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:

Re: Geographic map of members' locations

Post by megaloxana »

haha who's the guy WAY north in canada?

george- i can manually add you if you would like.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
User avatar
cad600
1000+ Posts
1000+ Posts
Posts: 1413
Joined: Fri May 09, 2008 3:41 pm
Location: Atlanta, GA

Re: Geographic map of members' locations

Post by cad600 »

Was able to add myself no problem. I'm also looking into a alternative program that might be a little more fun to use.
Yes, that is a Single Sided Swingarm FZR600 that I built.

Something is lurking, waiting, wanting to be built......It calls to me from the darkness....

I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:

Re: Geographic map of members' locations

Post by megaloxana »

cad600 wrote:Was able to add myself no problem. I'm also looking into a alternative program that might be a little more fun to use.
I ran across platial.com which looked a lil more interesting but i didn't mess around with it. Maybe you want to take a look.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
User avatar
cad600
1000+ Posts
1000+ Posts
Posts: 1413
Joined: Fri May 09, 2008 3:41 pm
Location: Atlanta, GA

Re: Geographic map of members' locations

Post by cad600 »

megaloxana wrote:I ran across platial.com which looked a lil more interesting but i didn't mess around with it. Maybe you want to take a look.
Check your PM's. I've found something that could be very cool. I only need to figure out if everyone can use it as I'm not sure it's is available for certain systems. Sence yamaha_george had problems, he's the first person I'm going to ask.
Yes, that is a Single Sided Swingarm FZR600 that I built.

Something is lurking, waiting, wanting to be built......It calls to me from the darkness....

I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
old_school
Level 8.0
Level 8.0
Posts: 824
Joined: Mon May 12, 2008 5:52 pm
Location: Princeton, NJ

Re: Geographic map of members' locations

Post by old_school »

I'm in looks pretty cool, we should add a link off one of the main forums or the member forum
NO FZR :(
05 Yamaha R1
03 Harley Fatboy
what's next?
User avatar
ian
Level 2.5
Level 2.5
Posts: 283
Joined: Mon May 19, 2008 1:36 pm
Location: Killeen, TX

Re: Geographic map of members' locations

Post by ian »

isn't there a way we could do this with google earth? not gmaps, but gearth...
Thanks, for a country where nobody is allowed to mind his own business. Thanks, for a nation of finks.
- William Burroughs
haha this is awesome... probably the only addiction support group i have seen that supports the addiction!

Last words are for fools who haven't said enough.
- Karl Marx
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:

Re: Geographic map of members' locations

Post by megaloxana »

ian wrote:isn't there a way we could do this with google earth? not gmaps, but gearth...
Yes, we're thinking of transitioning to that.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: Geographic map of members' locations

Post by yamaha_george »

megaloxana wrote:
ian wrote:isn't there a way we could do this with google earth? not gmaps, but gearth...
Yes, we're thinking of transitioning to that.
hi,
well if you do some other Linux guru will have to find away to make it work because Kubuntu Hardy Heron bombs out with messages from googles installer cannot find the X11 conf ( not suprising as is now called xorg.conf & has been for quite awhile )

Geo (fedup from having to tinker a perfectly working boxsto fit darkside scribblings) time to sleep me thinks
User avatar
cad600
1000+ Posts
1000+ Posts
Posts: 1413
Joined: Fri May 09, 2008 3:41 pm
Location: Atlanta, GA

Re: Geographic map of members' locations

Post by cad600 »

yamaha_george wrote: hi,
well if you do some other Linux guru will have to find away to make it work because Kubuntu Hardy Heron bombs out with messages from googles installer cannot find the X11 conf ( not suprising as is now called xorg.conf & has been for quite awhile )

Geo (fedup from having to tinker a perfectly working boxsto fit darkside scribblings) time to sleep me thinks
I'll try to get onto the GE forum and snoop around for a Linux fix. Kind of strange though that it is givving you problems. I only say this since eventhough it is a window based program, Google wants nothing to do with Microsoft. I'll let you know what I find. If we can get this to work, I think it would really be some neat stuff.

Rob
Yes, that is a Single Sided Swingarm FZR600 that I built.

Something is lurking, waiting, wanting to be built......It calls to me from the darkness....

I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: Geographic map of members' locations

Post by yamaha_george »

cad600 wrote:
yamaha_george wrote: hi,
well if you do some other Linux guru will have to find away to make it work because Kubuntu Hardy Heron bombs out with messages from googles installer cannot find the X11 conf ( not suprising as is now called xorg.conf & has been for quite awhile )

Geo (fedup from having to tinker a perfectly working boxsto fit darkside scribblings) time to sleep me thinks
I'll try to get onto the GE forum and snoop around for a Linux fix. Kind of strange though that it is givving you problems. I only say this since eventhough it is a window based program, Google wants nothing to do with Microsoft. I'll let you know what I find. If we can get this to work, I think it would really be some neat stuff.

Rob
Thanks Rob, cause I have my hands full at the moment with family / house chores
Post Reply