Differences

This shows you the differences between two versions of the page.

--- r6_99-02_r6_fork_swap [2009/01/31 18:59] – 71.56.48.81
+++ r6_99-02_r6_fork_swap [2023/07/05 13:46] (current) – 192.168.1.1
@@ Line 1: / Line 1: @@
 ====== THIS IS WHAT I HAVE TO WORK WITH ======
-[[http://fzronline.com/forum/viewtopic.php?f=30&t=2561]]
+[[http://fzrsupport.com/forum/viewtopic.php?f=30&t=2561]]
@@ Line 30: / Line 30: @@
 ====== Materials List: ======
-  * 99-02 R6 Triples or any other YEARS will work
+  * Triples, these are for a 99-02 R6 but any other YEARS / MODEL will work
-  * Fork Tubes
+  * Fork Tubes, that match the Triples
   * Hardened threaded rod in either 1/2inch or 5/8inch
   * Double ended bushings (contact cad600 or 95FZR600)
-  * Clipons from same year you choose
+  * Clipons, that match the forks
-  * Use your existing bearings,spacers and dust caps
+  * Wheel / Brakes, that match the forks
+  * Use your existing FZR bearings,spacers and dust caps
@@ Line 44: / Line 45: @@
   * The OEM stem was cut at the bottom triple and used for a bushing
   * I also cut the OEM stem at the top below both sets of threads and used at the top
-  * In the future we will be using a double ended bushing for top and bottom.
+  * In the future we will be using a double ended bushing for top and bottom and the OEM stem will not be used.
 {{:img1705yw7.jpg|}}
 {{:img1706iz4.jpg|}}
@@ Line 78: / Line 79: @@
 {{:steering14.jpg|}}
+{{:forks2.jpg|}}
 Contact: Cad600 or 95FZR600 for bushings
+===== UPDATE from TONY FOALE on the Design =====
+see:-[[http://fzrsupport.com/forum/viewtopic.php?f=30&t=2561&start=105]]
+OR
+Pix entitled "BottomYoke., Bottom Yoke 1, Bottom yoke 2, Bottom yoke 3..." at
+[[http://www.tonyfoale.com/AermacchiFrame/?N=A]]
+==== Editted by Y-G on 2010-01-05 ====