Differences

This shows you the differences between two versions of the page.

--- r6_99-02_r6_fork_swap [2009/01/31 16:42] – 71.56.48.81
+++ r6_99-02_r6_fork_swap [2023/07/05 13:46] (current) – 192.168.1.1
@@ Line 1: / Line 1: @@
 ====== THIS IS WHAT I HAVE TO WORK WITH ======
+[[http://fzrsupport.com/forum/viewtopic.php?f=30&t=2561]]
   * This mod will allow you to use any year or make fork setup on your FZR
+  * By using a threaded rod in 1/2inch or 5/8inch you are able to use any
+year model or make for this build. My first set of bushings were single sided
+and r6 stem was chopped to use for taking up the slack in the upper and lower
+triple holes.
+  * We now have come up with a design to use a double ended bushing on the top
+and bottom of the triple and bearings. It will serve as taking up slack in the triples
+and providing a place for the bearings to rest on. Oem bearings are retained in this
+mod.
+  * The 1st set of bushings were made from 6061 Aluminum Rod. These are still in place
+and used in my bike. I will give a 500 mile and 1000 mile inspection this summer.
+ We have now changed to Steel Double Sided bushings giving it a more solid fit for
+ added security and tolerances.
+  * I want to thank (Rob) CAD600 for everything on this build. Together we will be
+able to provide the bushings for any fork build you may have.
+  * I have purchased my own metal lathe and will be producing bushings for this mod.
+If you need anything made let one of us know. Thanks!8-)
 ====== Materials List: ======
-  * 99-02 R6 Triples or any other YEARS will work
+  * Triples, these are for a 99-02 R6 but any other YEARS / MODEL will work
-  * Fork Tubes
+  * Fork Tubes, that match the Triples
   * Hardened threaded rod in either 1/2inch or 5/8inch
   * Double ended bushings (contact cad600 or 95FZR600)
-  * Clipons from same year you choose
+  * Clipons, that match the forks
-  * Use your existing bearings,spacers and dust caps
+  * Wheel / Brakes, that match the forks
+  * Use your existing FZR bearings,spacers and dust caps
@@ Line 17: / Line 45: @@
   * The OEM stem was cut at the bottom triple and used for a bushing
   * I also cut the OEM stem at the top below both sets of threads and used at the top
-  * In the future we will be using a double ended bushing for top and bottom.
+  * In the future we will be using a double ended bushing for top and bottom and the OEM stem will not be used.
 {{:img1705yw7.jpg|}}
 {{:img1706iz4.jpg|}}
@@ Line 52: / Line 80: @@
 {{:steering14.jpg|}}
+{{:forks2.jpg|}}
+Contact: Cad600 or 95FZR600 for bushings
+===== UPDATE from TONY FOALE on the Design =====
+see:-[[http://fzrsupport.com/forum/viewtopic.php?f=30&t=2561&start=105]]
+OR
+Pix entitled "BottomYoke., Bottom Yoke 1, Bottom yoke 2, Bottom yoke 3..." at
+[[http://www.tonyfoale.com/AermacchiFrame/?N=A]]
+==== Editted by Y-G on 2010-01-05 ====