Differences

This shows you the differences between two versions of the page.

--- carburetor_page [2009/05/11 10:24] – 80.177.31.81
+++ carburetor_page [2020/10/19 11:50] (current) – external edit 127.0.0.1
@@ Line 36: / Line 36: @@
 {{:fzr600_emulsion_tube_identification.jpg?300|Click To Enlarge}}
 {{:carb-1.jpg?300|Click To Enlarge}}
+{{:fzr600_inserting_spring_into_diaphragm_assembly.jpg?300|Click To Enlarge}}
 {{:fzr600_inserting_diaphragm_assembly.jpg?300|Click To Enlarge}}
 {{:fzr600_inserting_needle_into_emulsion_tube.jpg?300|Click To Enlarge}}
-{{:fzr600_inserting_spring_into_diaphragm_assembly.jpg?300|Click To Enlarge}}
 {{:fzr600_inserting_the_block_jet_assembly.jpg?300|Click To Enlarge}}
+==== Syncing ====
+FIXME
+[[http://fzronline.com/forum/viewtopic.php?f=8&t=5924]]
+Placed here by Y_G until he gets a chance to edit this properly 2010-04-03
+[[http://fzronline.com/forum/viewtopic.php?f=21&t=6089]]
+A picture is worth 1000 words.(Carb Sync Tool)(Feel free to edit or use pictures)
+[[http://www.allthingsmoto.com/forums/f-15/how-set-your-motorcycle-carburetor-float-level-more-commentary-13608/]]
+An explanation of float height setting with tech terms explained
+==== Idle Adjustment ====
+In this photo, you can clearly see the idle adjust screw - top left. It has the flex area covered in the black plastic sheathing.\\
+*Note: These are Cali carbs and have 2 tubes shown on the right that may or may not be like your bike. I removed and plugged those holes.\\
+Turning the idle adjust screw clockwise will increase idle RPM's and counter clockwise will decrease rpms\\
+{{:fzr600_idle.jpg?300|Click To Enlarge}}
+==== VIDEOS ====
-==== Syncing ====
+=== FZR600 carburetor cleaning (by match417) ===
-FIXME
+{{youtube>small:k5R5XBI-I9U}}
+=== Drilling out EPA caps (by match417) ===
+{{youtube>small:qu3-3-RqDy4}}
-==== Idle Adjustment ====
+=== Bench sync FZR600 carbs (by match417) ===
-In this photo, you can clearly see the idle adjust screw - top left. It has the flex area covered in the black plastic sheathing.\\
+{{youtube>small:rUJUNG7sMfI}}
-*Note: These are Cali carbs and have 2 tubes shown on the right that may or may not be like your bike. I removed and plugged those holes.\\
-Turning the idle adjust screw clockwise will increase idle RPM's and counter clockwise will decrease rpms\\
-{{:fzr600_idle.jpg?300|Click To Enlarge}}
 [[http://fzronline.com/forum/viewtopic.php?f=32&t=1098|{{  :comments.gif  |CLICK HERE}}]]