Differences

This shows you the differences between two versions of the page.

--- 1991-92_fzr_1000_exup [2010/12/06 10:32] – 127.0.0.1
+++ 1991-92_fzr_1000_exup [2020/10/19 11:51] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ^Year^^1991-92 FZR1000 (EXUP)^ ^Engine^|Liquid cooled, four stroke, 35° forward inclined transverse four cylinder, DOHC, 5 valves per cylinder.| ^Capacity^|1002| ^Bore x Stroke^|75.5 x 56 mm| ^Compression Ratio^|12.0:1| ^Induction^|4x 38mm Mikuni BDST| ^Ignition / Starting^|Digital  /  electric| ^Max power (rear tire)^|145 hp 105.7 kW @ 10000 rpm  (rear tyre 131.7 hp @ 10500 rpm)| ^Max Torque^|10.9 kg-m 107 Nm @ 8500 rpm| ^Transmission / Drive^|5 Speed  /  chain| ^Front Suspension^|43mm Telehydraulic for adjustable preload, 120mm wheel travel.| ^Rear Suspension^|Gas/oil single shock, rising rate adjustable preload and damping. 130mm wheel travel.| ^Front Brakes^|2x 320mm discs 4 piston calipers| ^Rear Brakes^|Single 267mm disc 1 piston caliper| ^Front Tire^|130/60 VR17| ^Rear Tire^|170/60 VR17| ^Dry Weight / Wet-Weight^|209 kg / 236 kg| ^Fuel Capacity^|19 Litres| ^Consumption  average^|16.3 km/litres| ^Braking 60 - 0 / 100 - 0^|13.1 m / 37.0m| ^Standing ¼ Mile^|10.1 sec / 216.8 km/h| ^Top Speed^|290 km/h|
+----
+===== WIRING DIAGRAM FZR1000 '91 UK model =====
+{{:91-wiring-fzr1k.jpg|}}
+----
 info about the 1992 fzr 1000 swingarm and wheel.
-A) width of the inside of the swingarm where the wheel's axle gets in is 267 mm.
+  * A) width of the inside of the swingarm where the wheel's axle gets in is 267 mm.
-B) width of the wheel with sproket carier on, from bearing to bearing is 210 mm.
+  * B) width of the wheel with sproket carier on, from bearing to bearing is 210 mm.
 C) each side wheel spacer's width is 13 mm.
 D) caliper bracket's width is 27-28 mm.
@@ Line 12: / Line 16: @@
 Supplied by TrifGeorge
+----