Issue with one coil not getting spark

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
JDMClark
Site Newbie
Posts: 3
Joined: Mon Dec 15, 2014 6:52 pm

Issue with one coil not getting spark

Post by JDMClark »

First off, hi my name is Austin. I own a 1993 FZR600. I'm having an issue with getting spark on cylinders 2 and 3. 1 and 4 get fire. Swapping the connectors from the wire harness harness I get spark on 2 and 3 and not 1 and 4. So both coils are fine. Will start and run fine on 2 cylinders. Followed the wires from the connector that go to the ecu and the on off switch and they are good. Even ran new wires just to test and still no spark. Idk what's wrong help please.
Top
DonTZ125
Moderator
Posts: 2214
Joined: Tue Dec 02, 2008 11:20 pm
Location: Scarberia, ON
Contact:
Contact DonTZ125

Re: Issue with one coil not getting spark

Post by DonTZ125 »

Your TCI is damaged; the coil driver transistor that fires the 2-3 channel is dead. I can repair these units for US$100 + return shipping.

Send me a PM, and we'll discuss things further.
Top
JDMClark
Site Newbie
Posts: 3
Joined: Mon Dec 15, 2014 6:52 pm

Re: Issue with one coil not getting spark

Post by JDMClark »

DonTZ125 wrote:Your TCI is damaged; the coil driver transistor that fires the 2-3 channel is dead. I can repair these units for US$100 + return shipping.

Send me a PM, and we'll discuss things further.
I sent you a pm
Top
DonTZ125
Moderator
Posts: 2214
Joined: Tue Dec 02, 2008 11:20 pm
Location: Scarberia, ON
Contact:
Contact DonTZ125

Re: Issue with one coil not getting spark

Post by DonTZ125 »

email sent.
Top
Post Reply

Return to “FZR600”