does anyone have a cdi box for sale(igniter box)for 600 fzr?

[fzr19941995]

I really need this part thanks.If anybody has a working one for sale let me know.Thanks

[willandrip]

No; no-one has a CDI for a FZR 600.
They may however have a TCI unit.
There is a sales and wanted section in the index; you may get a better response there.
Notice how it is split into UK and US areas, it helps contributors to aid others; no-one from the UK is likely
to send a TCI to the US and vice versa; it is not financially viable.
The adding of one's location used to be a requirement on this forum; please do so in order that help may be given.
It also helps if the exact model is specified; there are far too many bikes described as FZR600 esp. in UK.

In the US/Canada it is often cheaper to send the TCI to DonTZ for repair who has already replied to your earlier posts.
In the UK; they are cheap and easily sourced and hence not repaired.

In an earlier post you asked why some units had much different wiring configurations; that is because they are specific to different models and will only operate on that model.The TCI units with extra wiring tails are for the FZR units with EXUP valve fitted.

Hope this aids your search.

Here is a link to indicate why repair is not feasible in UK/Europe.
http://www.ebay.co.uk/itm/YAMAHA-FZR600 ... 56667432d8

[fzr19941995]

OK thanks that helps a lot.Maybe I will see if Don can repair it.

[thatkid]

I have one for exup bikes.