FZR600 R1 Conversion

Airtech · Post by **Airtech** » Tue Aug 06, 2013 5:48 pm

Hey guys... this is Beau, and I work at Airtech. A lot of people don't know this, but we've been making these R1 conversion kits for the FZR's for over 14 years now.

The reason for this post, is we're trying to get some updated pics of bikes with our kits on them to feature on our Facebook page and website. So if you have one, or know someone who does, send me pics at beau@motobody.com, post them in this thread, or post them directly on our Facebook page (facebook.com/motobody).

Thanks

Post by **ragedigital** » Tue Aug 06, 2013 9:21 pm

Welcome to the site! A lot of people here know about Airtech. One of the few companies that made an updated fairing kit for the FZR.

I had just the tail on my FZR. I intergrated an 03-05 R6 undertail and LED tail light.

Darrin

Redoliander · Post by **Redoliander** » Wed Aug 07, 2013 2:46 am

Just moved in to the new place. Ill have to clean her up and take a few pics to send you this weekend.

Airtech · Post by **Airtech** » Wed Aug 07, 2013 11:59 am

ragedigital wrote:Welcome to the site! A lot of people here know about Airtech. One of the few companies that made an updated fairing kit for the FZR.

I had just the tail on my FZR. I intergrated an 03-05 R6 undertail and LED tail light.

Darrin

Thanks Darrin... great looking bike!

Airtech · Post by **Airtech** » Wed Aug 07, 2013 12:01 pm

Redoliander wrote:

Just moved in to the new place. Ill have to clean her up and take a few pics to send you this weekend.

Thanks Redoliander.... I'm looking forward to the pics!

pefrey · Post by **pefrey** » Fri Aug 09, 2013 9:12 am

I think if Airtech sold parts like the rear hugger and the front fender those would sell pretty well.

pefrey · Post by **pefrey** » Fri Aug 09, 2013 9:26 am

Actually, the belly pan too as I think racers might be interested. (if it is a one piece which it looks like)

Darrin, I like your bike, especially what you did with the black on the bottom of the side panels.

Post by **ragedigital** » Fri Aug 09, 2013 10:15 am

pefrey wrote:Darrin, I like your bike, especially what you did with the black on the bottom of the side panels.

Certainly looked better before the next owner got a hold of it. He had it less than a month.

pefrey · Post by **pefrey** » Fri Aug 09, 2013 1:16 pm

He should have known there are better ways to adjust rake and trail

or

custom, not everybody's definition is the same.

Sorry.

Genesis · Post by **Genesis** » Fri Aug 09, 2013 1:16 pm

pefrey wrote:I think if Airtech sold parts like the rear hugger and the front fender those would sell pretty well.

I would buy a front fender

Sent from my C771 using Tapatalk 2

willandrip · Post by **willandrip** » Mon Aug 12, 2013 2:07 pm

ragedigital wrote:
pefrey wrote:Darrin, I like your bike, especially what you did with the black on the bottom of the side panels.
Certainly looked better before the next owner got a hold of it. He had it less than a month.

Just shows how well the Airtech seat units crash !..............
I'll get my coat..... :squid

Airtech · Post by **Airtech** » Mon Aug 12, 2013 4:29 pm

pefrey wrote:I think if Airtech sold parts like the rear hugger and the front fender those would sell pretty well.

The R1 kit does include the front fender and the rear hugger... We can actually sell those parts separately.

Redoliander · Post by **Redoliander** » Thu Sep 26, 2013 10:41 pm

Sorry so late but here are some pics of my fzr 600 with airtech fairings. I do have the airtech rear hugger but the tire I have is too tall for it to fit

FZRSupport: the FZROnline Archive