Bleeding the brakes

tclayton9 · Post by **tclayton9** » Wed Jul 24, 2013 1:27 pm

Can someone give me the easy way on bleeding the brakes. I just cleaned my front calipers, and decieded to use my fzr parts first and see what happens before I buy r6 parts.

pefrey · Post by **pefrey** » Wed Jul 24, 2013 2:42 pm

This should help.

http://fzronline.com/wiki/doku.php?id=b ... _5_minutes

tclayton9 · Post by **tclayton9** » Wed Jul 24, 2013 4:18 pm

Is that the only way to do it. I was trying to find aanother way to do it.

Harrysf707 · Post by **Harrysf707** » Thu Jul 25, 2013 10:03 pm

You could try a mityvac, though it's a bit more expensive. Pefrey's way works perfectly well, it's even cheaper.

~JM~ · Post by **~JM~** » Fri Jul 26, 2013 5:55 am

I picked up a vacuum tool from Harbor Freight & it works well for a cheep tool.

I used it on a completely dry hydraulic clutch set-up on a Yamaha FJ1200 & it worked great. Just make sure you keep an eye on the master cylinder reservoir so it doesn't go empty on you.

The Ketchup squeeze bottle looks like a good way to go also.

~JM~

Genesis · Post by **Genesis** » Fri Jul 26, 2013 12:25 pm

~JM~ wrote:I picked up a vacuum tool from Harbor Freight & it works well for a cheep tool
~JM~

I have the same one, works good.
Sent from my C771 using Tapatalk 2

FZRSupport: the FZROnline Archive

Bleeding the brakes

Bleeding the brakes

Re: Bleeding the brakes

Re: Bleeding the brakes

Re: Bleeding the brakes

Re: Bleeding the brakes

Re: Re: Bleeding the brakes