front brake question

[tclayton9]

okay so my stock front master cylinder has a leak. I was wondering when I use a r6 front master cylinder can I keep the front FZR calipers and lines and run the master cylinder to the one line using a smaller banjo bolt, or I have to use two lines like on the r6.

[DonTZ125]

Yes. Use the FZR banjo bolt, but be sure to get new copper crush washers.

[tclayton9]

OK that was my solution. But how many washers would I need.

[DonTZ125]

If you're only replacing the M/C, then you'll only need two - one on either side of the hose.

[tclayton9]

Gotcha thanks.