Side stand
Moderators: Site Director, FZR Forum Moderators
-
- 100+ Posts
- Posts: 107
- Joined: Mon Jul 02, 2012 4:49 am
- Location: Arizona, USA
Side stand
Is it common for the side stand to get bent? My 1000 has seemed to be leaning a bit more than normal. I noticed it is bent a bit. I've looked on eBay and there seems to be quite a bit of people selling side stands that look to be bent.
Re: Side stand
first impressions seem to be that its normal...is your rear tyre flat? that would make it lean less on the angle
-
- 100+ Posts
- Posts: 107
- Joined: Mon Jul 02, 2012 4:49 am
- Location: Arizona, USA
Side stand
Yes. Both tires are flat.
Re: Side stand
"Well, there's your problem!"
1989 3LN1 FZR250R, currently stock.
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
Re: Side stand
That was a funny thread
-
- 100+ Posts
- Posts: 107
- Joined: Mon Jul 02, 2012 4:49 am
- Location: Arizona, USA
Side stand
Yea. Just used to a kickstand being straight. I'd rather ask a stupid question than look stupid with the bike on its side on the floor.
Re: Side stand
Yeah mine was bent when i picked up the frame and when i noticed the crash damage i thought it was from the fall you that it got the bend in it, I guess not thanks for doing the asking of my question.
Even a blind monkey gets the odd banana