Fairing Brackets????

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
SikSaiNT
Site Newbie
Posts: 10
Joined: Tue May 21, 2013 11:07 am
Location: New Jersey USA

Fairing Brackets????

Post by SikSaiNT »

hi guys, i searched the forum and didnt see this topic anywhere. i recently purchased a 1989 fzr600 with no fairings. i found a left one but the holes dont seem to match. My question is, is there any type of bracket that is supposed to go behind the fairing? or does it just bolt to the frame and headlight housing? Also there is a choke on the left side. is this a factory part? Thank you for yur help in advance.
1989 FRZ600 genisis 12,500mi
2005 Ram Hemi (Worked)
2001 BMW 740i M Sport
1987 Pontiac Firebird ( Show Car)
User avatar
Harrysf707
100+ Posts
100+ Posts
Posts: 118
Joined: Sat Dec 15, 2012 12:16 pm
Location: North Cal, California

Re: Fairing Brackets????

Post by Harrysf707 »

I can't comment about the "brackets", my assumption is that it's supposed to mount onto the frame. The choke however, is supposed to be there, it is a Carbureted bike.
1993 FZR 600 w/ 92' front fairing swap, 520 conversion, Yoshimura R&D Exhaust, RaceTech springs.
thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: Fairing Brackets????

Post by thatkid »

There are, I believe, 6 brackets that bolt to the frame that the fairings bolt to. I should have all 6 if you are looking for them.
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
User avatar
Harrysf707
100+ Posts
100+ Posts
Posts: 118
Joined: Sat Dec 15, 2012 12:16 pm
Location: North Cal, California

Re: Fairing Brackets????

Post by Harrysf707 »

Can you post pictures where/what those brackets look like? Because there are only 2 places on each side that my fairings will bolt onto, the third is apparently missing...Sorry to steal this thread haha. Although It should be useful to the OP.
-Thanks
1993 FZR 600 w/ 92' front fairing swap, 520 conversion, Yoshimura R&D Exhaust, RaceTech springs.
User avatar
pefrey
Level 5.5
Level 5.5
Posts: 573
Joined: Sat Feb 21, 2009 4:20 pm
Location: Park Ridge, NJ

Re: Fairing Brackets????

Post by pefrey »

Where in NJ are you located?
SikSaiNT
Site Newbie
Posts: 10
Joined: Tue May 21, 2013 11:07 am
Location: New Jersey USA

Re: Fairing Brackets????

Post by SikSaiNT »

Im in williamstown south Jersey. Yes im interested in the brackets pm sent
1989 FRZ600 genisis 12,500mi
2005 Ram Hemi (Worked)
2001 BMW 740i M Sport
1987 Pontiac Firebird ( Show Car)
User avatar
pefrey
Level 5.5
Level 5.5
Posts: 573
Joined: Sat Feb 21, 2009 4:20 pm
Location: Park Ridge, NJ

Re: Fairing Brackets????

Post by pefrey »

That's just a little to far for me to stop by and help out. If I get a chance I'll take pics of the mounting points / brackets. I don't really know of any other reference.
SikSaiNT
Site Newbie
Posts: 10
Joined: Tue May 21, 2013 11:07 am
Location: New Jersey USA

Re: Fairing Brackets????

Post by SikSaiNT »

ok thx pefrey id appreciate it.
1989 FRZ600 genisis 12,500mi
2005 Ram Hemi (Worked)
2001 BMW 740i M Sport
1987 Pontiac Firebird ( Show Car)
Post Reply