Tried my hand at painting my Center Carriers Gold. Came out decent for my first time, I'm sure I'll want to repaint them eventually
Yamacati 600 (Slow interwebz beware)
Moderators: Site Director, FZR Forum Moderators
-
Monarch600
- Site Newbie
- Posts: 35
- Joined: Fri Apr 19, 2013 12:12 am
- Location: San Dimas, CA (Yes, that place from Bill & Ted's excellent adventure)
Re: Yamacati 600 (Slow interwebz beware)
Tried my hand at painting my Center Carriers Gold. Came out decent for my first time, I'm sure I'll want to repaint them eventually
89 Fzr 600 Exup with Shotgun Termi system, Ducati 748 race cowl, and single beam projector.
-
JasonRDfan
- Level 2.0
- Posts: 239
- Joined: Fri Jul 06, 2012 6:15 am
- Location: Pittsburgh, PA
Re: Yamacati 600 (Slow interwebz beware)
Looking good 
what's next? Lol
what's next? Lol92 fzr600 Vance & Hines edition, galindo f1 grips, Vance & Hines super sport complete exhaust, oem clutch with Vance & Hines springs, Piaa horn, Hella headlight, Vance & Hines power pak, passenger seat cowl, 07 r6 regulator, ballistic evo2 8 cell, JT 14 tooth sprocket, Joe Florida sportbike multi-color led kit, galindo bar ends,
-
Monarch600
- Site Newbie
- Posts: 35
- Joined: Fri Apr 19, 2013 12:12 am
- Location: San Dimas, CA (Yes, that place from Bill & Ted's excellent adventure)
Re: Yamacati 600 (Slow interwebz beware)
Planning on buying a rear brake caliper from Kid. I'll probably pick up a t595 front brake set up within the next month as well. I also have to bend my pipe because my chick wants to start riding 2up and I have to angle it down so I can put my rear pegs on..JasonRDfan wrote:Looking good
89 Fzr 600 Exup with Shotgun Termi system, Ducati 748 race cowl, and single beam projector.
Re: Yamacati 600 (Slow interwebz beware)
Monarch600 wrote:Planning on buying a rear brake caliper from Kid. I'll probably pick up a t595 front brake set up within the next month as well. I also have to bend my pipe because my chick wants to start riding 2up and I have to angle it down so I can put my rear pegs on..JasonRDfan wrote:Looking good
If your forks need a rebuild anytime soon I have a set of powder coated 90+ fork lowers you could swap to and then use the r6/r1 brakes.
You know, just throwing it out there.
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
Re: R6 wheel on eBay... good deal?
love the upper. I also really like the fzr side fairings. Looks great. Someday I might own a duc. The 748 is my favorite.
Sent from my C771 using Tapatalk 2
Sent from my C771 using Tapatalk 2
1990 Yamaha FZR600 Genesis, Daily Driver
My FZR6 Rebuild
1985 GMC 4x4 T-15 X-Cab Sierra
1999 Chevy 4x4 Blazer (wifes car)
"If a man can build it, I can take it apart and sometimes even put it back together and fix it" --Unknown
"'I wish none of this had happened.' 'So do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given to us.....'" J.R.R. Tolkien
My FZR6 Rebuild
1985 GMC 4x4 T-15 X-Cab Sierra
1999 Chevy 4x4 Blazer (wifes car)
"If a man can build it, I can take it apart and sometimes even put it back together and fix it" --Unknown
"'I wish none of this had happened.' 'So do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given to us.....'" J.R.R. Tolkien
-
JasonRDfan
- Level 2.0
- Posts: 239
- Joined: Fri Jul 06, 2012 6:15 am
- Location: Pittsburgh, PA
Re: Yamacati 600 (Slow interwebz beware)
That's funny brakes are next for you because I'm getting steel brake lines next for mine
92 fzr600 Vance & Hines edition, galindo f1 grips, Vance & Hines super sport complete exhaust, oem clutch with Vance & Hines springs, Piaa horn, Hella headlight, Vance & Hines power pak, passenger seat cowl, 07 r6 regulator, ballistic evo2 8 cell, JT 14 tooth sprocket, Joe Florida sportbike multi-color led kit, galindo bar ends,
-
kilika2
- 1000+ Posts
- Posts: 1268
- Joined: Thu Sep 24, 2009 2:50 pm
- Location: South East Missouri
- Contact:
Re: Yamacati 600 (Slow interwebz beware)
My name is Chris and I approve of this thread. Jk but I do dig it.
Chris.
Chris.
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)
1995 FZR600 Sold
2006 R1 Sold :-\
2009 Buell 1125R
-
JasonRDfan
- Level 2.0
- Posts: 239
- Joined: Fri Jul 06, 2012 6:15 am
- Location: Pittsburgh, PA
Re: Yamacati 600 (Slow interwebz beware)
Lol, he's hard at work on this bike. Very impressivekilika2 wrote:My name is Chris and I approve of this thread. Jk but I do dig it.
Chris.
I wonder if he gets to ride it?92 fzr600 Vance & Hines edition, galindo f1 grips, Vance & Hines super sport complete exhaust, oem clutch with Vance & Hines springs, Piaa horn, Hella headlight, Vance & Hines power pak, passenger seat cowl, 07 r6 regulator, ballistic evo2 8 cell, JT 14 tooth sprocket, Joe Florida sportbike multi-color led kit, galindo bar ends,
-
Monarch600
- Site Newbie
- Posts: 35
- Joined: Fri Apr 19, 2013 12:12 am
- Location: San Dimas, CA (Yes, that place from Bill & Ted's excellent adventure)
Re: Yamacati 600 (Slow interwebz beware)
thatkid wrote:Monarch600 wrote:Planning on buying a rear brake caliper from Kid. I'll probably pick up a t595 front brake set up within the next month as well. I also have to bend my pipe because my chick wants to start riding 2up and I have to angle it down so I can put my rear pegs on..JasonRDfan wrote:Looking good
If your forks need a rebuild anytime soon I have a set of powder coated 90+ fork lowers you could swap to and then use the r6/r1 brakes.
You know, just throwing it out there.
Stop giving me ideas! I can't spend money I don't have yet ]:
89 Fzr 600 Exup with Shotgun Termi system, Ducati 748 race cowl, and single beam projector.
-
Monarch600
- Site Newbie
- Posts: 35
- Joined: Fri Apr 19, 2013 12:12 am
- Location: San Dimas, CA (Yes, that place from Bill & Ted's excellent adventure)
Re: R6 wheel on eBay... good deal?
Thanks man, I have the same love for the 748, hoping to pick one up in a couple years during winter so the prices arn't inflated.Genesis wrote:love the upper. I also really like the fzr side fairings. Looks great. Someday I might own a duc. The 748 is my favorite.
Sent from my C771 using Tapatalk 2
Last edited by Monarch600 on Mon May 13, 2013 4:25 pm, edited 1 time in total.
89 Fzr 600 Exup with Shotgun Termi system, Ducati 748 race cowl, and single beam projector.
-
Monarch600
- Site Newbie
- Posts: 35
- Joined: Fri Apr 19, 2013 12:12 am
- Location: San Dimas, CA (Yes, that place from Bill & Ted's excellent adventure)
Re: Yamacati 600 (Slow interwebz beware)
Cheers! She's my daily rider.. Although I do find myself getting lost in the canyons when I'm supposed to be doing errandsJasonRDfan wrote:Lol, he's hard at work on this bike. Very impressivekilika2 wrote:My name is Chris and I approve of this thread. Jk but I do dig it.
Chris.
It was hell having her topless for a few days, besides money, that's the only thing that scares me about modding her. I hate modding when I could be riding!
89 Fzr 600 Exup with Shotgun Termi system, Ducati 748 race cowl, and single beam projector.
-
JasonRDfan
- Level 2.0
- Posts: 239
- Joined: Fri Jul 06, 2012 6:15 am
- Location: Pittsburgh, PA
Re: Yamacati 600 (Slow interwebz beware)
That's why my rims aren't powder coated yet! I need an extra set so I don't have to wait to ride
92 fzr600 Vance & Hines edition, galindo f1 grips, Vance & Hines super sport complete exhaust, oem clutch with Vance & Hines springs, Piaa horn, Hella headlight, Vance & Hines power pak, passenger seat cowl, 07 r6 regulator, ballistic evo2 8 cell, JT 14 tooth sprocket, Joe Florida sportbike multi-color led kit, galindo bar ends,
Re: Yamacati 600 (Slow interwebz beware)
Seriously, have you not heard of me?JasonRDfan wrote:That's why my rims aren't powder coated yet! I need an extra set so I don't have to wait to ride
What color you want them? I can have a set done by the weekend and shipped out monday. I mean, I'm just sayin' Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
-
JasonRDfan
- Level 2.0
- Posts: 239
- Joined: Fri Jul 06, 2012 6:15 am
- Location: Pittsburgh, PA
Re: Yamacati 600 (Slow interwebz beware)
I want to get them done yellow? Would it be a close match? I really can not get them done right now. My bike was vandalized and smashed about a month ago. I spent a small fortune fixing and replacing everything. My girlfriend wants to Kill me!! So I need to calm things down right now. I can't spend any more on the bike.
92 fzr600 Vance & Hines edition, galindo f1 grips, Vance & Hines super sport complete exhaust, oem clutch with Vance & Hines springs, Piaa horn, Hella headlight, Vance & Hines power pak, passenger seat cowl, 07 r6 regulator, ballistic evo2 8 cell, JT 14 tooth sprocket, Joe Florida sportbike multi-color led kit, galindo bar ends,
Re: Yamacati 600 (Slow interwebz beware)
There isnt much you cant do to that bike! and be careful of Kid! his stuff is too nice and will keep you wanting more!
and because i had a problem, and couldnt stop, so i had to go cold turkey and sell my baby....this would have been my next project for her. nothing wrong with a little plastic surgery!
748 tail.....mmmmmmmmm
and because i had a problem, and couldnt stop, so i had to go cold turkey and sell my baby....this would have been my next project for her. nothing wrong with a little plastic surgery!
748 tail.....mmmmmmmmm
I did that.
"(12:38:42) sweekster: i work when i want because i'm sweeks"
"(12:38:42) sweekster: i work when i want because i'm sweeks"