jet kit??

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
mossyoakboy
50+ Posts
50+ Posts
Posts: 57
Joined: Sun Mar 31, 2013 2:16 pm
Location: eastern iowa

jet kit??

Post by mossyoakboy »

so while I was cleanin my carbs I noticed on my main jet that it has the number 105 and on the starter jet it says 525 I believe.... is this stock or is it aftermarket and if it is does anybody know what stage it is???
Combat Engineers, Shaping the Battlefield one explosion at a time!!

bike: '91 fzr600

cage: '99 f150
User avatar
kilika2
1000+ Posts
1000+ Posts
Posts: 1268
Joined: Thu Sep 24, 2009 2:50 pm
Location: South East Missouri
Contact:

Re: jet kit??

Post by kilika2 »

There is a small decimal in there. 52.5.
ImageImageImage
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)


1995 FZR600 Sold :-(
2006 R1 Sold :-\
2009 Buell 1125R :-)
mossyoakboy
50+ Posts
50+ Posts
Posts: 57
Joined: Sun Mar 31, 2013 2:16 pm
Location: eastern iowa

Re: jet kit??

Post by mossyoakboy »

o ok.... so you know what that means?? cause im new to bikes this is my first one and I do not know the differences with the stages of jets and how to tell what is what
Combat Engineers, Shaping the Battlefield one explosion at a time!!

bike: '91 fzr600

cage: '99 f150
User avatar
fzrbrandon
Level 7.5
Level 7.5
Posts: 762
Joined: Mon Oct 06, 2008 3:21 pm
Location: North Hollywood, CA
Contact:

Re: jet kit??

Post by fzrbrandon »

I believe 105 is the stock main jet size for the CA models.
Image Image

92 FZR600 - 3EN2 400 swingarm, Micron, DynoJet, Factory Pro, K&N, R6 shock, RT springs/emulators, R6 MC, Galfer, YZF calipers, Vortex, RK, YZF/R6 VR/R, Vortex, Zero Gravity

90 FZR400 - Sharkskinz, D&D, Sudco, DynoJet, Factory Pro, Ohlins, RT springs/emulators, JEM Machine, Woodcraft, NRC, Galfer, Vortex, RK, YZF/R6 VR/R, Vortex, Lockhart Phillips

89 FZR600 - Vance & Hines, DynoJet, Zero Gravity - sold in '91

http://www.fzrbrandon.com

!!! 400 & 600 Parts For Sale !!! viewtopic.php?f=18&t=9971
mossyoakboy
50+ Posts
50+ Posts
Posts: 57
Joined: Sun Mar 31, 2013 2:16 pm
Location: eastern iowa

Re: jet kit??

Post by mossyoakboy »

If it doesn't have the exup valve then its not a ca model right?? cause mine does not have it
Combat Engineers, Shaping the Battlefield one explosion at a time!!

bike: '91 fzr600

cage: '99 f150
User avatar
fzrbrandon
Level 7.5
Level 7.5
Posts: 762
Joined: Mon Oct 06, 2008 3:21 pm
Location: North Hollywood, CA
Contact:

Re: jet kit??

Post by fzrbrandon »

mossyoakboy wrote:If it doesn't have the exup valve then its not a ca model right?? cause mine does not have it
Not neccessarily. The PO may have replaced the stock exhaust. Or... Maybe they bought a different set of carbs that happened to be from an EXUP bike.

Just checked - The CA & 48-State bikes ALL had the 107.5 main jet from the factory. It was the starter jet that was smaller on the CA model (50). Since your starter jets are 52.5, they are likely 48-state carbs. Another possibility is that your bike came from a higher altitude (think Denver, CO, etc.) and was therefore jetted with smaller main jets.
Image Image

92 FZR600 - 3EN2 400 swingarm, Micron, DynoJet, Factory Pro, K&N, R6 shock, RT springs/emulators, R6 MC, Galfer, YZF calipers, Vortex, RK, YZF/R6 VR/R, Vortex, Zero Gravity

90 FZR400 - Sharkskinz, D&D, Sudco, DynoJet, Factory Pro, Ohlins, RT springs/emulators, JEM Machine, Woodcraft, NRC, Galfer, Vortex, RK, YZF/R6 VR/R, Vortex, Lockhart Phillips

89 FZR600 - Vance & Hines, DynoJet, Zero Gravity - sold in '91

http://www.fzrbrandon.com

!!! 400 & 600 Parts For Sale !!! viewtopic.php?f=18&t=9971
Post Reply