parts FT/FS fairings, headlight, carbs, misc

Moderators: Site Director, FZR Forum Moderators

Forum rules
Sellers: Your "For Sale" ad may be pulled if you do NOT have your location in your profile. New members with less than 10 posts should give adequate information concerning themselves and why they are selling.

Members: Please use your best judgement when buying from others online, whether it be from someone here or Craigslist or eBay. Use a service to pay, like PayPal, never send cash, checks or other payment. If possible, refrain from giving out too much of your personal information. We do not limit new users from selling as we want our members to be able to get first dibs. It can be risky buying from anyone. Use common sense. If it doesn't feel right - don't do it. If possible, buy from a reputable member.

Please Note: Neither FZROnline.com, nor those financially responsible for the domain, nor any of the community members, will be held responsible for any transaction in anyway being it financially or otherwise.

Image

While not required to sell your items, if you feel compelled to do so, you may make a donation to this site via PayPal to donation@fzronline.com, to help keep this forum active.
Sikowanalize
Site Newbie
Posts: 43
Joined: Tue Mar 29, 2011 10:09 am

parts FT/FS fairings, headlight, carbs, misc

Post by Sikowanalize »

looking to trade some parts I have laying around. im located in south dakota. I have:

all parts from an 89 fzr600. not perfect, no major cracks or anything, would be perfect to repaint.
Image

these two pics are of the bottom fairing - part of the bolt hole is broken
Image
Image
side fairings sold for $80

subframe fairings
Image
fairing bracket
Image
rear tail assembly
Image

headlights
Image
pending at $35

gauge cluster, no cracks
Image


carbs I rebuilt two years ago. I put in new gasket kits, the needles and the emulsion tubes. I synched them last august. I ran gas stabilizer through the bike, pulled the carbs off and drained the fuel.
Image
factory pro needles
Image
factory pro nickle plated emulsion tubes
Image
carbs are sold, fp nickle plated emulsion tubes available

I have a box full of carb parts as well, if anyone needs any small parts

im looking for a very small headlight assembly for the street fighter look, parts for the r6 brake swap, parts for the hydraulic clutch swap, dirty/drag bars, aftermarket gauge, stator cover, bar end mirrors, random bits like that. I can add cash if I need to.

Image
Last edited by Sikowanalize on Tue Mar 05, 2013 11:39 pm, edited 3 times in total.
1990 FZR1000
KaspenOne
100+ Posts
100+ Posts
Posts: 130
Joined: Sun Nov 25, 2012 4:48 am
Location: Santa Maria, California
Contact:

Re: parts FT/FS fairings, headlight, carbs, misc

Post by KaspenOne »

ill buy the front fairing and both side fairing pm me! 93455 is my zip code
Sal Co-Owner of SisBro Motowerkz, Santa Maria
Pacific Coast Riderz -Vice President- Santa Maria Chapter
1996 Yamaha Fzr 600
UNI Air Filter, FP 1.0, R6 header danmoto exhaust,
Orbit Chain 530 with JT Sprocket Set -1 front/+2 rear
Racetech Front suspension
Bridgestone BT-014 120/70/17 & 150/60/18
http://www.facebook.com/Salvador.Leal.Jr
http://www.youtube.com/user/KaspenOne
http://www.facebook.com/pages/Pacific-C ... 9453630808 & http://www.facebook.com/pcr805
KaspenOne
100+ Posts
100+ Posts
Posts: 130
Joined: Sun Nov 25, 2012 4:48 am
Location: Santa Maria, California
Contact:

Re: parts FT/FS fairings, headlight, carbs, misc

Post by KaspenOne »

oh with the faring brackets aswell and maby the tail fairings just in case , let me know
Sal Co-Owner of SisBro Motowerkz, Santa Maria
Pacific Coast Riderz -Vice President- Santa Maria Chapter
1996 Yamaha Fzr 600
UNI Air Filter, FP 1.0, R6 header danmoto exhaust,
Orbit Chain 530 with JT Sprocket Set -1 front/+2 rear
Racetech Front suspension
Bridgestone BT-014 120/70/17 & 150/60/18
http://www.facebook.com/Salvador.Leal.Jr
http://www.youtube.com/user/KaspenOne
http://www.facebook.com/pages/Pacific-C ... 9453630808 & http://www.facebook.com/pcr805
Sikowanalize
Site Newbie
Posts: 43
Joined: Tue Mar 29, 2011 10:09 am

Re: parts FT/FS fairings, headlight, carbs, misc

Post by Sikowanalize »

replied
1990 FZR1000
KaspenOne
100+ Posts
100+ Posts
Posts: 130
Joined: Sun Nov 25, 2012 4:48 am
Location: Santa Maria, California
Contact:

Re: parts FT/FS fairings, headlight, carbs, misc

Post by KaspenOne »

i just got it, and i just seen what you meant about the headlight fairing being broken. so ill take both side farings and both tail side fairings. shoot me the price in my box.. if its resonable ill paypal it to you
Sal Co-Owner of SisBro Motowerkz, Santa Maria
Pacific Coast Riderz -Vice President- Santa Maria Chapter
1996 Yamaha Fzr 600
UNI Air Filter, FP 1.0, R6 header danmoto exhaust,
Orbit Chain 530 with JT Sprocket Set -1 front/+2 rear
Racetech Front suspension
Bridgestone BT-014 120/70/17 & 150/60/18
http://www.facebook.com/Salvador.Leal.Jr
http://www.youtube.com/user/KaspenOne
http://www.facebook.com/pages/Pacific-C ... 9453630808 & http://www.facebook.com/pcr805
User avatar
Hamaya
Site Newbie
Posts: 18
Joined: Sun Nov 11, 2012 2:47 pm
Location: Madison, WI

Re: parts FT/FS fairings, headlight, carbs, misc

Post by Hamaya »

PM sent about headlight fairing
1992 FZR600: K&N filter, thatkid R6 header, Delkevic 8" silencer
Sikowanalize
Site Newbie
Posts: 43
Joined: Tue Mar 29, 2011 10:09 am

Re: parts FT/FS fairings, headlight, carbs, misc

Post by Sikowanalize »

replied to both. just so everyone else knows, I wasnt listing the front fairing because its damaged. the headlight stay bracket is bent on the right side where it actually bolts onto the bike. there is a piece missing by the windshield (where the fairing and windshield overlap slightly) and due to the right blinker being pushed in, there is damage on the right side. I suppose if you had enough time with a plastic welder it would be able to be repaired, but I simply didnt wanna sell junk. if anyone wants it, it's free with the headlight. as long as you pay shipping

edit: I noticed the coolant surge tank and voltage regulator are in the pics as well. if anyone wants em, pay shipping and they are yours

edit #2: $80 + shipping for side fairings and brackets. $30+ shipping for subframe side plastics. shipping isnt cheap!
1990 FZR1000
asianbandit
Site Newbie
Posts: 8
Joined: Tue Nov 02, 2010 1:55 pm
Location: Memphis, TN

Re: parts FT/FS fairings, headlight, carbs, misc

Post by asianbandit »

Your bike looks sweet - How did you go about painting the engine/frame/etc....? Sent you message about the Carbs too - I got dibs if the price is good!
Sikowanalize
Site Newbie
Posts: 43
Joined: Tue Mar 29, 2011 10:09 am

Re: parts FT/FS fairings, headlight, carbs, misc

Post by Sikowanalize »

asianbandit wrote:Your bike looks sweet - How did you go about painting the engine/frame/etc....? Sent you message about the Carbs too - I got dibs if the price is good!
I dont like how the frame turned out, but its pretty simple. remove old paint, sand it a bit, seal prime paint. then I just used engine enamel on the engine after I cleaned all the old grit and dirt off. I never got a message about the carbs!
1990 FZR1000
asianbandit
Site Newbie
Posts: 8
Joined: Tue Nov 02, 2010 1:55 pm
Location: Memphis, TN

Re: parts FT/FS fairings, headlight, carbs, misc

Post by asianbandit »

I got my bike for cheap - someone hit the plastics with spray paint while still on the bike so the frame is black in some places (dum-as). Don't mean to high-jack your thread....It looks good from the pics...Sent another message on the carbs...not sure what's going on...seem to be having issues getting messages out.

Thx
Sikowanalize
Site Newbie
Posts: 43
Joined: Tue Mar 29, 2011 10:09 am

Re: parts FT/FS fairings, headlight, carbs, misc

Post by Sikowanalize »

haha thanks. the single stage paint didnt hold up very well, so im gunna change it up a bit this season. no messages yet. you sure you're hitting the pm button and not the email button? make me an offer on the carbs
1990 FZR1000
User avatar
Hinky1986
Site Newbie
Posts: 10
Joined: Mon Feb 18, 2013 10:32 pm
Location: Saint George, Kansas, United States

Re: parts FT/FS fairings, headlight, carbs, misc

Post by Hinky1986 »

Ill take the front faring and headlight if you still have it. Zip code is 66535
KaspenOne
100+ Posts
100+ Posts
Posts: 130
Joined: Sun Nov 25, 2012 4:48 am
Location: Santa Maria, California
Contact:

Re: parts FT/FS fairings, headlight, carbs, misc

Post by KaspenOne »

do you still have the fairing brackets? how much for just those? 93455
Sal Co-Owner of SisBro Motowerkz, Santa Maria
Pacific Coast Riderz -Vice President- Santa Maria Chapter
1996 Yamaha Fzr 600
UNI Air Filter, FP 1.0, R6 header danmoto exhaust,
Orbit Chain 530 with JT Sprocket Set -1 front/+2 rear
Racetech Front suspension
Bridgestone BT-014 120/70/17 & 150/60/18
http://www.facebook.com/Salvador.Leal.Jr
http://www.youtube.com/user/KaspenOne
http://www.facebook.com/pages/Pacific-C ... 9453630808 & http://www.facebook.com/pcr805
Sikowanalize
Site Newbie
Posts: 43
Joined: Tue Mar 29, 2011 10:09 am

Re: parts FT/FS fairings, headlight, carbs, misc

Post by Sikowanalize »

sorry kaspen, gunna try to keep the brackets with the fairings for right now. ill let you know if I change my mind

headlight (and the free front fairing assembly) and carbs are pending. I returned the carbs to stock. I have the factory pro emulsion tubes for sale if anyone is interested, 1 full season of riding on them.

i'll let ya know here shortly Hinky. just incase, current price of the headlight is $35 plus shipping
1990 FZR1000
User avatar
Hinky1986
Site Newbie
Posts: 10
Joined: Mon Feb 18, 2013 10:32 pm
Location: Saint George, Kansas, United States

Re: parts FT/FS fairings, headlight, carbs, misc

Post by Hinky1986 »

Cool thanks. How much for the emulsion tubes.
Post Reply