Any interest in a YZF based 660?
I've got all the parts including some very tasty upgrades that I'm no longer going to do anything with. My plan was to build a 660 engined FZR400, but I've completely changed my mind. I have all of the engine parts and electronics. The only missing pieces are the carbs. The engine is 100% dismantled.
Included:
YZF600R Barnett Clutch kit
FZR600 NRC peanut cover
FZR600 Powersports (NRC knock off) stator cover - light rash
Falicon adjustable cam sprockets
New crank bearings
New conrod bearings
New Rod bolts
New wrist pins / clips
New piston rings
New Gasket set
Cosmetic 3mm base gasket
FZR600 Crank
YZF600 Cases
YZF600 valve head
YZF600 cylinder head
YZf600 conrods
YZF600 pistons
- Should be everything needed to put it together and have a running 660 engine.
Also have:
New '89 FZR600 wire harness
Ignitech Ignition module
New Electrosport VR
Let me know if there is any interest. I'm not really willing to break up the engine parts at this time - all or nothing for now. If there is enough interest in the parts, I may reconsider. I'll try to get pics up this weekend.
F/S YZF660 engine
Moderators: Site Director, FZR Forum Moderators
Forum rules
Sellers: Your "For Sale" ad may be pulled if you do NOT have your location in your profile. New members with less than 10 posts should give adequate information concerning themselves and why they are selling.
Members: Please use your best judgement when buying from others online, whether it be from someone here or Craigslist or eBay. Use a service to pay, like PayPal, never send cash, checks or other payment. If possible, refrain from giving out too much of your personal information. We do not limit new users from selling as we want our members to be able to get first dibs. It can be risky buying from anyone. Use common sense. If it doesn't feel right - don't do it. If possible, buy from a reputable member.
Please Note: Neither FZROnline.com, nor those financially responsible for the domain, nor any of the community members, will be held responsible for any transaction in anyway being it financially or otherwise.
While not required to sell your items, if you feel compelled to do so, you may make a donation to this site via PayPal to donation@fzronline.com, to help keep this forum active.
Sellers: Your "For Sale" ad may be pulled if you do NOT have your location in your profile. New members with less than 10 posts should give adequate information concerning themselves and why they are selling.
Members: Please use your best judgement when buying from others online, whether it be from someone here or Craigslist or eBay. Use a service to pay, like PayPal, never send cash, checks or other payment. If possible, refrain from giving out too much of your personal information. We do not limit new users from selling as we want our members to be able to get first dibs. It can be risky buying from anyone. Use common sense. If it doesn't feel right - don't do it. If possible, buy from a reputable member.
Please Note: Neither FZROnline.com, nor those financially responsible for the domain, nor any of the community members, will be held responsible for any transaction in anyway being it financially or otherwise.
While not required to sell your items, if you feel compelled to do so, you may make a donation to this site via PayPal to donation@fzronline.com, to help keep this forum active.
F/S YZF660 engine
Yes, that is a Single Sided Swingarm FZR600 that I built.
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
-
0303fzr600
- Site Newbie
- Posts: 3
- Joined: Wed Jul 18, 2012 1:45 am
- Location: Colorado
Re: F/S YZF660 engine
Hadn't given it much thought. Make me an offer.
Some of these parts are quite expensive being new from Yamaha. I probably have a grand into base engine components and the new parts for the build.
Some of these parts are quite expensive being new from Yamaha. I probably have a grand into base engine components and the new parts for the build.
Yes, that is a Single Sided Swingarm FZR600 that I built.
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
-
LuckyStriker86
- Site Newbie
- Posts: 23
- Joined: Sat Nov 17, 2012 2:45 pm
- Location: Rhode Island, US
Re: F/S YZF660 engine
Interested in the ignition, base gasket, and adjustable cam. Price?
1996 FZR600
1989 FZR400 - FZR600 motor (660 conversion in progress)
1989 FZR400 - FZR600 motor (660 conversion in progress)
Re: F/S YZF660 engine
LuckyStriker86 wrote:Interested in the ignition, base gasket, and adjustable cam. Price?
"I'm not really willing to break up the engine parts at this time - all or nothing for now. If there is enough interest in the parts, I may reconsider. I'll try to get pics up this weekend."
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
-
LuckyStriker86
- Site Newbie
- Posts: 23
- Joined: Sat Nov 17, 2012 2:45 pm
- Location: Rhode Island, US
Re: F/S YZF660 engine
I am actually already in the build process and have not yet acquired the parts that I asked about. Already have the yzf connecting rods, so a spacer would be good, otherwise I would have to bore my existing rods, which I was leaning away from.
If you are willing to break up the lot, please let me know.
If you are willing to break up the lot, please let me know.
1996 FZR600
1989 FZR400 - FZR600 motor (660 conversion in progress)
1989 FZR400 - FZR600 motor (660 conversion in progress)
-
Sikowanalize
- Site Newbie
- Posts: 43
- Joined: Tue Mar 29, 2011 10:09 am
Re: F/S YZF660 engine
this interests me, considering I plan on doing a full engine rebuild in the next couple months. I dont have the cash right now, but if ya have the set in a few months im certainly interested. have you mic'd the conrods and crank by chance? I would have a machinist go over it anyway, but just curious.
1990 FZR1000