...I looked at a schematic of an engine but don't look like it's supposed to have one there...any help? the bike is a 90... thanks for your help guys... 
spacer needed ?
Moderators: Site Director, FZR Forum Moderators
-
turbospark
- Site Newbie
- Posts: 7
- Joined: Mon Oct 08, 2012 8:56 pm
- Location: P.R. USVI
spacer needed ?
Hey guys..been trying to help my buddy out...I sold him my fzr600 'cause I'm in the process of getting a 1k and he tells me that there seems to be a spacer in between the cylinders and the crankcases that it's missing ...I looked at a schematic of an engine but don't look like it's supposed to have one there...any help? the bike is a 90... thanks for your help guys...
...I looked at a schematic of an engine but don't look like it's supposed to have one there...any help? the bike is a 90... thanks for your help guys... 1990 Fzr600
1985 ZL900
1985 ZL900
-
HybridSport600
- 50+ Posts
- Posts: 91
- Joined: Mon Oct 29, 2012 4:38 am
- Location: US
Re: spacer needed ?
I have only heard of this when doing a 660 conversion , and there is no spacer inbetween the case and head on an OEM , only 4 o-rings and a base gasket.
when you get to this page, hover the mouse over the picture and it will allow you to zoom in and out as needed. good luck!
http://www.bikebandit.com/houseofmotorc ... #sch131024
when you get to this page, hover the mouse over the picture and it will allow you to zoom in and out as needed. good luck!
http://www.bikebandit.com/houseofmotorc ... #sch131024
89 FZR 600 US- In process of Full frame up resto/Modding
94 FZR 600 US- all OEM
05 600 f4i US- Full Cylinder machining/w full Port/polished head /w stainless valves,Custom H-beam connecting rods,
low compression Weisco Forged pistons,and alcohol mix intercooled. -Sold in 09
79 XS650 US- Boyer electronic ignition, accell coil, ricks stator upgrade, Custom Flamed Ghost pearl 2 tone blue
83 Xj550 US- Full restoration- w/minor mods, Custom Candy Tangerine pearl paint, in process of Fiberglassing a solo seat
69 Vw Trike 2180cc h4 -w/ 15lbs boost paxton supercharger in progress.
79 HD Shovelhead Custom- 1340cc- Just purchased 11-3-12
94 FZR 600 US- all OEM
05 600 f4i US- Full Cylinder machining/w full Port/polished head /w stainless valves,Custom H-beam connecting rods,
low compression Weisco Forged pistons,and alcohol mix intercooled. -Sold in 09
79 XS650 US- Boyer electronic ignition, accell coil, ricks stator upgrade, Custom Flamed Ghost pearl 2 tone blue
83 Xj550 US- Full restoration- w/minor mods, Custom Candy Tangerine pearl paint, in process of Fiberglassing a solo seat
69 Vw Trike 2180cc h4 -w/ 15lbs boost paxton supercharger in progress.
79 HD Shovelhead Custom- 1340cc- Just purchased 11-3-12
-
turbospark
- Site Newbie
- Posts: 7
- Joined: Mon Oct 08, 2012 8:56 pm
- Location: P.R. USVI
-
HybridSport600
- 50+ Posts
- Posts: 91
- Joined: Mon Oct 29, 2012 4:38 am
- Location: US
Re: spacer needed ?
No problem, its why I joined this site! ask anything,anytime. 
"Got a $5 head, buy a $5 helmet"
"Got a $5 head, buy a $5 helmet"
89 FZR 600 US- In process of Full frame up resto/Modding
94 FZR 600 US- all OEM
05 600 f4i US- Full Cylinder machining/w full Port/polished head /w stainless valves,Custom H-beam connecting rods,
low compression Weisco Forged pistons,and alcohol mix intercooled. -Sold in 09
79 XS650 US- Boyer electronic ignition, accell coil, ricks stator upgrade, Custom Flamed Ghost pearl 2 tone blue
83 Xj550 US- Full restoration- w/minor mods, Custom Candy Tangerine pearl paint, in process of Fiberglassing a solo seat
69 Vw Trike 2180cc h4 -w/ 15lbs boost paxton supercharger in progress.
79 HD Shovelhead Custom- 1340cc- Just purchased 11-3-12
94 FZR 600 US- all OEM
05 600 f4i US- Full Cylinder machining/w full Port/polished head /w stainless valves,Custom H-beam connecting rods,
low compression Weisco Forged pistons,and alcohol mix intercooled. -Sold in 09
79 XS650 US- Boyer electronic ignition, accell coil, ricks stator upgrade, Custom Flamed Ghost pearl 2 tone blue
83 Xj550 US- Full restoration- w/minor mods, Custom Candy Tangerine pearl paint, in process of Fiberglassing a solo seat
69 Vw Trike 2180cc h4 -w/ 15lbs boost paxton supercharger in progress.
79 HD Shovelhead Custom- 1340cc- Just purchased 11-3-12
Re: spacer needed ?
turbospark wrote:thanks for the info...very helpfull!!!!!!
and the base gasket and o-rings are there if oil isn't running uncontrollably all over the engine.
http://www.michiganmobileservice.com/
“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor
“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor