Wondering if anyone might be able to grab pics of their YZF600 swingarm. If someone's got one NOT mounted to the bike, it would be great to get a top-down shot (along with some dimensions) Specifically, I'm curious as to where/how the hugger mounts as I'd like to see if I can adapt one to fit on a 3TJ swinger. Both rear ends run 4.5" x 17" rear wheels so I'm thinking the YZF piece might be a good candidate.
Thanks,
Brandon
YZF rear hugger on a 3TJ swingarm?
Moderators: Site Director, FZR Forum Moderators
-
fzrbrandon
- Level 7.5
- Posts: 762
- Joined: Mon Oct 06, 2008 3:21 pm
- Location: North Hollywood, CA
- Contact:
YZF rear hugger on a 3TJ swingarm?
92 FZR600 - 3EN2 400 swingarm, Micron, DynoJet, Factory Pro, K&N, R6 shock, RT springs/emulators, R6 MC, Galfer, YZF calipers, Vortex, RK, YZF/R6 VR/R, Vortex, Zero Gravity
90 FZR400 - Sharkskinz, D&D, Sudco, DynoJet, Factory Pro, Ohlins, RT springs/emulators, JEM Machine, Woodcraft, NRC, Galfer, Vortex, RK, YZF/R6 VR/R, Vortex, Lockhart Phillips
89 FZR600 - Vance & Hines, DynoJet, Zero Gravity - sold in '91
http://www.fzrbrandon.com
!!! 400 & 600 Parts For Sale !!! viewtopic.php?f=18&t=9971
-
Bike_junkie
- 50+ Posts
- Posts: 79
- Joined: Tue Jan 17, 2012 9:20 pm
- Location: Tacoma, wa
Re: YZF rear hugger on a 3TJ swingarm?
The yzf swinger is wider, they use a 5" back wheel. I know a yzf wheel will barely fit in a 3tj swinger. I was thinking that maybe a hugger for a tz would work. http://www.airtech-streamlining.com/yam ... 96-97H.htm part at26.
cb175 cafe sitting in storage
88 fzr4/6, only the frame is stock
88 fzr4/6, only the frame is stock
-
Bike_junkie
- 50+ Posts
- Posts: 79
- Joined: Tue Jan 17, 2012 9:20 pm
- Location: Tacoma, wa
Re: YZF rear hugger on a 3TJ swingarm?
Ok, I forgot to get pics but the yzf hugger would be a close fit. The mounts would have to be added to the arm as none of them match. But width and length are very close.
cb175 cafe sitting in storage
88 fzr4/6, only the frame is stock
88 fzr4/6, only the frame is stock