Hi Camala,
Too be honest without an original to take measurements from I would have just assumed to have made the spacer length the distance between the two recesses. Guess the extra 0.3mm makes an important difference, thanks for the tips.
Source for Front Wheel Spacer?
Moderators: Site Director, FZR Forum Moderators
Re: Source for Front Wheel Spacer?
I only just saw this. I've got a spare one from a wheel i chuck ages ago. You can have it for the price of postage, I'll sent you a PM.
With the spacer i found it was 0.5mm wider that the max seating depth of the bearings when i had to make one for my TZ250 rim (no one seemed to have one of those laying around
)
With the spacer i found it was 0.5mm wider that the max seating depth of the bearings when i had to make one for my TZ250 rim (no one seemed to have one of those laying around
)fzr660/400: fzr400 3en1 frame, 3en2 swinger, custom single seat subframe, fzr660 motor conversion, APE adjustable cam gears, full D&D 4-2-1 exhaust, falicon clutch basket, ignitech ignition, R6 front end with tz250 wheel, ohlins shock, storz steering damper, tzr250 rear wheel.
weighs 166kg wet (25kg lighter than my stock fzr600).
weighs 166kg wet (25kg lighter than my stock fzr600).
Re: Source for Front Wheel Spacer?
Cheers Dru,
PM'd you but I have got one now, thanks all the same.
PM'd you but I have got one now, thanks all the same.