compatibility between 600, 750, 1000?

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
CrazySkullCrusher
100+ Posts
100+ Posts
Posts: 102
Joined: Sat Jul 30, 2011 6:14 pm
Location: massillon ohio, usa

compatibility between 600, 750, 1000?

Post by CrazySkullCrusher »

Does anyone know if the fuel cap and brake/clutch levers from fzr750 and 1000 will work on a 600? I found some really cool adjustable levers and fuel cap/base but they only list 750 &1000 as compatible.
96 fzr600. R1 body kit.

94 xj600 seca 2: complete upgrade restoration.

73 Honda cb750 four: bored out 178 over (850 cc) street cam, smoothbore carbs, velocity stacks, corbin king-queen seat, 4-1 header with modified megaphone exhaust, dyna-s ignition, too many other mods to mention and still under construction.

72 Suzuki ts90 cci. First bike ever, bone stock and still starts with 2 kicks.
CrazySkullCrusher
100+ Posts
100+ Posts
Posts: 102
Joined: Sat Jul 30, 2011 6:14 pm
Location: massillon ohio, usa

Re: compatibility between 600, 750, 1000?

Post by CrazySkullCrusher »

Bumping my own post. Come one, someone has to know....
96 fzr600. R1 body kit.

94 xj600 seca 2: complete upgrade restoration.

73 Honda cb750 four: bored out 178 over (850 cc) street cam, smoothbore carbs, velocity stacks, corbin king-queen seat, 4-1 header with modified megaphone exhaust, dyna-s ignition, too many other mods to mention and still under construction.

72 Suzuki ts90 cci. First bike ever, bone stock and still starts with 2 kicks.
Gizzard1533
Level 2.0
Level 2.0
Posts: 220
Joined: Sun Sep 11, 2011 12:44 pm
Location: Cambridgeshire

Re: compatibility between 600, 750, 1000?

Post by Gizzard1533 »

Aren't the 750 and the 1000 hydraulic clutches? If they are the no they wont fit. You best of just looking for 600.
sweekster
2000+ Posts
2000+ Posts
Posts: 2773
Joined: Tue May 13, 2008 10:52 am
Location: Perris, CA

Re: compatibility between 600, 750, 1000?

Post by sweekster »

To be more specific with the levers, FZR 750 and 1000 Genesis (87-88) and 1000 EXUP (89-90) brake levers should work. YZF 600/ Euro FZR600R (95+) clutch levers should work. The gas filler should be the same through all models for all years so that should fit too. Key words are SHOULD. I'm going off bikes that are similar in lever design to the 600 during their production runs. You might want to do much research (look at more pics?) to come to a better conclusion.
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD

Image


THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
CrazySkullCrusher
100+ Posts
100+ Posts
Posts: 102
Joined: Sat Jul 30, 2011 6:14 pm
Location: massillon ohio, usa

Re: compatibility between 600, 750, 1000?

Post by CrazySkullCrusher »

Thanks, probably going to leave the levers alone and get a vortex filler cap.
96 fzr600. R1 body kit.

94 xj600 seca 2: complete upgrade restoration.

73 Honda cb750 four: bored out 178 over (850 cc) street cam, smoothbore carbs, velocity stacks, corbin king-queen seat, 4-1 header with modified megaphone exhaust, dyna-s ignition, too many other mods to mention and still under construction.

72 Suzuki ts90 cci. First bike ever, bone stock and still starts with 2 kicks.
Post Reply