VMAX calipers

cowboi · Post by **cowboi** » Tue Jan 03, 2012 4:25 pm

has anyone verified that the 09 vmax 6 piston calipers fit the fzr 600. from what ive read the bolt holes are 100mm center to center and that they are a direct bolt on for the fzr 600.

i found this on a vmax forum

'' The R1/R6/Warrior NON-Radial calipers are all direct bolt on's for 93-07 Vmax's. If the bolts are through the side into the fork then it's the same. The radial (monoblock) calipers have the bolts passing downward into the fork and will not fit.''

Post by **sweekster** » Tue Jan 03, 2012 5:31 pm

Only one way to find out. You might want to source a master cylinder to go with them if they fit.

Post by **ragedigital** » Tue Jan 03, 2012 7:28 pm

Doesn't appear that is the case. All of the images I have seen for "2009" models have the radial (monobloc) calipers.

cowboi · Post by **cowboi** » Thu Jan 05, 2012 2:27 pm

ragedigital wrote:Doesn't appear that is the case. All of the images I have seen for "2009" models have the radial (monobloc) calipers.

yes i see now. found a good pic of the front end

FZRSupport: the FZROnline Archive

VMAX calipers

VMAX calipers

Re: VMAX calipers

Re: VMAX calipers

Re: VMAX calipers