lowering bike

[jims 93 fzr600r]

i made my own out of 1/4 in steel and drilled to holes and painted ,and done easy dropped it bout 2inches and drop the front an 1inch

[cntryboy85]

i am looking at lowering mine and my question is how do you compress the shock or do you have to do that to fit it in the lower hole?

[ragedigital]

i am looking at lowering mine and my question is how do you compress the shock or do you have to do that to fit it in the lower hole?

If you use dog bones to lower the rear of the bike, you don't need to worry about compressing the rear shock.

[yamaha_george]

alright i need to lower my bike at least 2 inches i see on e-bay there is a lowering kit which is two bars with 3 holes to adjust high 1 is stock one is 1.5" drop and oe 3" drop.....if i buy this will there be anything else i need to lower the rear down some? or does anyone know a good kit out there..i have a 1989 fzr 600. thank you.

Having seen the 3holes sets sold on ebay they aare not built to take the starin properly by design.
Check ReeelRazor with a PM.I have set of his that I used for my wife and she is 5'0" and his work=ed for her

[cntryboy85]

ill look into it if i dont like the way it rides or feel comfortable with the ones i have. but i did see your post about the lack of material between holes and see where you are coming form. but the ones i have are pretty beefy so idk yet.