On my FZR 600 92 I put only swingarm and wheel from Yamaha FZR 600 94 (I dont change the shock)...(now rear wheel is 17 x 5.00)
Rear shock dont work.... What is the problem..??
Left swinarm is old( '92), right is new ('94)...
Thanks
FZR 600 shock problem(after swingarm swap)
Moderators: Site Director, FZR Forum Moderators
Re: FZR 600 shock problem(after swingarm swap)
Both swingarm's are 4.5". What do you mean "the rear shock doesn't work"?
'92 FZR600
Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder
Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder
Re: FZR 600 shock problem(after swingarm swap)
My english is bad and I dont know how to explain....
I hope you uderstand me.....
When I ride bike - it is to hard....the swingarm go up only 2-3mm....like its fixed....probably because they are longer then old...but how to fix it?delvryboy wrote:Both swingarm's are 4.5". What do you mean "the rear shock doesn't work"?
I hope you uderstand me.....
Re: FZR 600 shock problem(after swingarm swap)
I meant *rims. But i just realized you are from overseas and aren't talking about a swinger from a '94 YZF swinger(stateside).
Last edited by delvryboy on Thu May 05, 2011 7:53 pm, edited 1 time in total.
'92 FZR600
Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder
Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder
Re: FZR 600 shock problem(after swingarm swap)
the shock mounting point it a longer distance from the pivot, so it will affect movement and the angle the shock sits at. What it the ride height difference from old to new? different dog bones may help cure the problem by bringing the levels back to normal.
Fzr400 3tj x2
fzr400 3en1 (17in conversion) now gone its way in parts!
'94 cbr 900rr
fzr400 3en1 (17in conversion) now gone its way in parts!
'94 cbr 900rr
Re: FZR 600 shock problem(after swingarm swap)
I have longer and shorter and original dog bones....a try all and is the same ....taggy wrote:the shock mounting point it a longer distance from the pivot, so it will affect movement and the angle the shock sits at. What it the ride height difference from old to new? different dog bones may help cure the problem by bringing the levels back to normal.
-
- Level 4.0
- Posts: 418
- Joined: Sun May 10, 2009 8:23 am
- Location: Milton, Ontario, Canada
Re: FZR 600 shock problem(after swingarm swap)
You need a softer spring on the shock. This happens after swinger swaps unfortunately...
Re: FZR 600 shock problem(after swingarm swap)
I cant find softer spring.....Freestyle72 wrote:You need a softer spring on the shock. This happens after swinger swaps unfortunately...
Can I get softer shock if I change the shock angle ??