400 rear sets

[Fzrmike33]

Anybody know where to get any nice rearsets for the fzr 400 ?

[mk2davis]

I have a set that may work. I'll send a PM.

[Freestyle72]

I think the 04 or 05 GSXR1000 rearsets are only a couple mm from working... so most people shave a mm off each hole and they work.

[fzrbrandon]

Woodcraft. Although you need to use the stock levers.

[Fzrmike33]

Saw the woodcrafts, i want ones with brake lever and shifter.

[thatkid]

Any rearset should work with an adapter plate. Just depends on how much you want to spend.

[Fzrmike33]

You mean a homemade adapter plate ? dont want to spend more than $225. The 04 suzuki gsxr 1000 ones look nice, i hope freestyle is right about them being off very little, but there not cheap.


I did just find these on ebay, but they both look like shift levers, weird looking brake lever. http://cgi.ebay.com/ebaymotors/CNC-Rear ... 563e1096f8


I also found these that say there for a FZR but im not sure where to measure for the mounting holes distance on my bike, its in total pieces.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 97.c0.m619

[RoadDogma]

Why don't you measure the distance between mounting bosses on your frame?

[Fzrmike33]

Yeah i will have measure them. The guy in the UK said the rear master cylinder wouldnt work with his rear sets, or something like that, the guy dont give much information.

[RoadDogma]

Yeah, it would probably require some kind of bracket to relocate the master cylinder. Woodcraft is the same way except they supply the mounting hardware.
What's wrong with stock rear-sets?

[Fzrmike33]

Stock Rearsets suckkkkkkkkkkkk. My spacing on my frame is 40 mm center to center on the mounting holes, or 1 5/8 ".

[RoadDogma]

I guess I should have been more specific. Different rear-sets will have different features. What is it that you are hoping to accomplish by changing them?

[Fzrmike33]

What i want is for my feet to set back further than the stock ones, better grip on them, and better looking. Im just trying to do my hybrid top notch and i want new rearsets to go with it, my stocks are kinda beat up to.

Other than woodcraft i cant find anyone who makes rearsets for this bike, there is that guy in the Uk, but he seems like not to nice and dont want give me a measurement on his rearsets. So i guess it has to be rearsets from some other bike and make them fit my bike.

[RoadDogma]

Woodcraft FZR rear-sets are located up and back from stock and have pretty aggressive grip. You could probably adapt some other levers to fit them. Alternatively, have you tried to contact China_racer about his rear-sets? Maybe he can help out.

[fzrbrandon]

Woodcraft FZR rear-sets are located up and back from stock and have pretty aggressive grip. You could probably adapt some other levers to fit them.

+1 on Woodcraft and possibly using other levers. In fact, there may be Woodcraft levers for other bikes that might work. Just a thought...

Alternatively, have you tried to contact China_racer about his rear-sets? Maybe he can help out.

Since I seem to recall him hanging up his leathers, I wonder if he might have more time now to make rearsets?