Forgive me for I have sinned...
Moderators: Site Director, FZR Forum Moderators
- houseforsaken
- Site Newbie
- Posts: 41
- Joined: Thu Dec 24, 2009 2:07 pm
- Location: Newport, RI
Forgive me for I have sinned...
I traded my 97 FZR 600 for an 06 R1. She is amazing and beautiful.
I just want to thank everyone who helped a fellow rider out on this site. Your hospitality will not be forgotten!
Thanks!
-House
I just want to thank everyone who helped a fellow rider out on this site. Your hospitality will not be forgotten!
Thanks!
-House
- fzrbrandon
- Level 7.5
- Posts: 762
- Joined: Mon Oct 06, 2008 3:21 pm
- Location: North Hollywood, CA
- Contact:
Re: Forgive me for I have sinned...
Traitor... At least it's still a Yamaha! LOL!
Enjoy the new toy and don't be a stranger!
Enjoy the new toy and don't be a stranger!
92 FZR600 - 3EN2 400 swingarm, Micron, DynoJet, Factory Pro, K&N, R6 shock, RT springs/emulators, R6 MC, Galfer, YZF calipers, Vortex, RK, YZF/R6 VR/R, Vortex, Zero Gravity
90 FZR400 - Sharkskinz, D&D, Sudco, DynoJet, Factory Pro, Ohlins, RT springs/emulators, JEM Machine, Woodcraft, NRC, Galfer, Vortex, RK, YZF/R6 VR/R, Vortex, Lockhart Phillips
89 FZR600 - Vance & Hines, DynoJet, Zero Gravity - sold in '91
http://www.fzrbrandon.com
!!! 400 & 600 Parts For Sale !!! viewtopic.php?f=18&t=9971
Re: Forgive me for I have sinned...
not a traitor! its all in the family!
93 Yamaha FZR 600 - Track Project
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
Re: Forgive me for I have sinned...
be careful that bike wont be as forgiving as the 600 was, i know this from experience. ride safe and within your limits
- fzrbrandon
- Level 7.5
- Posts: 762
- Joined: Mon Oct 06, 2008 3:21 pm
- Location: North Hollywood, CA
- Contact:
Re: Forgive me for I have sinned...
Yeah, I know. I was just pokin' fun. Believe me, I'd love to have a newer bike. My only problem as that I have such a hard time reaching the damn ground on them! LOL! I actually sat on what I seem to recall was an '07 GSXR750 and I have to admit that, although it was high, it didn't feel too bad because of the lower center of gravity.haunter wrote:not a traitor! its all in the family!
Enough about me though! That IS a sweet ride. As Apsolus said, be careful and spend some time getting use to it.
92 FZR600 - 3EN2 400 swingarm, Micron, DynoJet, Factory Pro, K&N, R6 shock, RT springs/emulators, R6 MC, Galfer, YZF calipers, Vortex, RK, YZF/R6 VR/R, Vortex, Zero Gravity
90 FZR400 - Sharkskinz, D&D, Sudco, DynoJet, Factory Pro, Ohlins, RT springs/emulators, JEM Machine, Woodcraft, NRC, Galfer, Vortex, RK, YZF/R6 VR/R, Vortex, Lockhart Phillips
89 FZR600 - Vance & Hines, DynoJet, Zero Gravity - sold in '91
http://www.fzrbrandon.com
!!! 400 & 600 Parts For Sale !!! viewtopic.php?f=18&t=9971
- kilika2
- 1000+ Posts
- Posts: 1268
- Joined: Thu Sep 24, 2009 2:50 pm
- Location: South East Missouri
- Contact:
Re: Forgive me for I have sinned...
Don't make me remind everyone what 2 of the forum mods are now riding. Ha ha it's all good. As long as you keep riding I'm happy. Looking good.
Chris.
Chris.
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)
1995 FZR600 Sold
2006 R1 Sold :-\
2009 Buell 1125R
- ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: Forgive me for I have sinned...
I would love to have an R1. An R6 would also do, but I want to keep that quiet as Haunter may pin me for the reason his bike goes missing.
As if you have anywhere to go. I bought a GSXR, but I don't hang around those forums. This is where all the real work is done. The newer bikes don't have the same kind of people the older bikes do. The only "mods" they talk about in newer bike forums are adding swing arm spools and K&N filters - poor saps!houseforsaken wrote:Your hospitality will not be forgotten!
Thanks for joining and participating in the most "active" FZR Community on the internet!
Re: Forgive me for I have sinned...
Nope he's a Traitor That bike has too many ff's
Take care house, you lucky bastard
Mal.
Take care house, you lucky bastard
Mal.
- houseforsaken
- Site Newbie
- Posts: 41
- Joined: Thu Dec 24, 2009 2:07 pm
- Location: Newport, RI
Re: Forgive me for I have sinned...
Thanks! I'll do my best to be careful! She is a beauty...took her out yesterday for the first time. I just picked her up this past saturday.
Rage, you're right...i'll probably still be lurking around on this site...everyone here has to be the best group I've interacted with thus far. You are right...all they talke about are stacks/spools/and lights, . Though...there's not much I'd like to do to her....I don't need her to be faster that's for sure
After my FZR...I wouldn't buy anything other than a Yamaha! It was a great deal that I couldn't pass up! I will miss the FZR though...I loved cornering on that thing.
Rage, you're right...i'll probably still be lurking around on this site...everyone here has to be the best group I've interacted with thus far. You are right...all they talke about are stacks/spools/and lights, . Though...there's not much I'd like to do to her....I don't need her to be faster that's for sure
After my FZR...I wouldn't buy anything other than a Yamaha! It was a great deal that I couldn't pass up! I will miss the FZR though...I loved cornering on that thing.
Re: Forgive me for I have sinned...
Whoa whoaaa, you traded the fzr for that?? Like a straight up trade?? Lol where is this place haha
That is beautiful! Just get rid of that rear fender... stick around man, we have an r1 section too!! Lol
That is beautiful! Just get rid of that rear fender... stick around man, we have an r1 section too!! Lol
1992 FZR 1000
:Under serious re-construction:
:Under serious re-construction:
- kilika2
- 1000+ Posts
- Posts: 1268
- Joined: Thu Sep 24, 2009 2:50 pm
- Location: South East Missouri
- Contact:
Re: Forgive me for I have sinned...
This brings up a good question for me. Just generally what are the differences between the r6 and the r1? I've been on an 02 r6, but I didn't ride it any distance at all.
Chris.
Chris.
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)
1995 FZR600 Sold
2006 R1 Sold :-\
2009 Buell 1125R
- ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: Forgive me for I have sinned...
I think the R1's extra 400cc's is the main difference and then everything has to be modified to accompany the extra power/weight.kilika2 wrote:Just generally what are the differences between the r6 and the r1?
This is one great reason why the GSXR750 is so popular. It uses the same frame and most of the same components as the 600 - keeping the bike nimble.
Thanks for joining and participating in the most "active" FZR Community on the internet!
- houseforsaken
- Site Newbie
- Posts: 41
- Joined: Thu Dec 24, 2009 2:07 pm
- Location: Newport, RI
Re: Forgive me for I have sinned...
Actually I got a great deal! $1800 trade in and 5k cash. Would've been more in trade...but the fairing was broken . I will have to take a look at the R1 thread...I went to the R1-Forum...not too much info on there.
McFizzer, I'll be getting rid of that rear fender ASAP, . I wish I tell you more Kililka2 about the R1..but other than it being fuel injected and 998 cc's, I don't know much. I know it feels great and looks amazing!!!
McFizzer, I'll be getting rid of that rear fender ASAP, . I wish I tell you more Kililka2 about the R1..but other than it being fuel injected and 998 cc's, I don't know much. I know it feels great and looks amazing!!!
- kilika2
- 1000+ Posts
- Posts: 1268
- Joined: Thu Sep 24, 2009 2:50 pm
- Location: South East Missouri
- Contact:
Re: Forgive me for I have sinned...
So pretty much it's like the difference between the Fzr600 and Fzr1k. Is the R1 alum frame?
Chris.
Chris.
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)
1995 FZR600 Sold
2006 R1 Sold :-\
2009 Buell 1125R
Re: Forgive me for I have sinned...
Yes alluminum deltabox frame... I think in 06 they were using a 16 valve engine, ti valve. Just a very realible bike. The weight between that and the R6 isn't incredibly different. I love hearing people talking about the weight differences...then I look at my 1k and go yeah... its REAL heavy LOL in reality I would tops make the difference in weight 20-30lbs. The newer bikes are so well balanced, the cassette style transmission helps thin the bike out alot and allow for a better of COG too. you got a pretty good deal there with 1800 for the 600.. At my shop we gave a kid a 2000 trade in on his yzf 600 and that had cracks in the fairings and we had to replace the clutch... AND we marked it at 2500 for it... hardly any profit..
Anyway great deal ya got there. Enjoy... the R1 forum from pokin around looked like it had a lot of info but I really didn't read too much into it... If I were you I'd go to your yammie dealer and see if ya can pick up a service manual... No other great way to learn a bike then to read how to take it the hell apart an put it back together
Anyway great deal ya got there. Enjoy... the R1 forum from pokin around looked like it had a lot of info but I really didn't read too much into it... If I were you I'd go to your yammie dealer and see if ya can pick up a service manual... No other great way to learn a bike then to read how to take it the hell apart an put it back together
1992 FZR 1000
:Under serious re-construction:
:Under serious re-construction: