What year is my TDI from?

Moderators: Site Director, FZR Forum Moderators

Post Reply
sciamanna44
Site Newbie
Posts: 1
Joined: Fri Oct 22, 2010 3:11 pm

What year is my TDI from?

Post by sciamanna44 »

I purchased a wiring harness off eBay for my '94 FXZR600 and got a harness for a FZR1000 (it was listed as a FZR600 harness and I couldn't tell the differance from the pictures.) It still had the CDI on it so I tried looking up the year off that with no luck. It is a hitachi and has two female plugs inlets with some wires coming out the middle that has a circular male plug on it. The numbers on the CDI are BB7211, then 3UU-00, and stamped in a box is 0215. Thanks for your help!
User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4153
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: What year is my TDI from?

Post by ragedigital »

I don't know of any chart that would give you that information, so you'll have to wait till some riders check their own CDIs to give you the info.

darrin
Thanks for joining and participating in the most "active" FZR Community on the internet!
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: What year is my TDI from?

Post by yamaha_george »

ragedigital wrote:I don't know of any chart that would give you that information, so you'll have to wait till some riders check their own CDIs to give you the info.

darrin
Darrin,
you mean to tell me there is actually some detail on FZR's Sweekster does not know, sheesh I need to go lie down I have come over all faint.........................














J/K
thatkid

Re: What year is my CDI from?

Post by thatkid »

Is it infact an exup FZR600 TCI (CDI)?

http://cgi.ebay.co.uk/YAMAHA-FZR600-3HE ... 0491307287
YAMAHA FZR600 3HE CDI BOX ECU PART NUMBER BB7211 3UU-00 0209
http://cgi.ebay.com/ebaymotors/ws/eBayI ... &viewitem=
FZR 600 CDI ALL YEARS 3UU-00 BB7211 FZR600 CDI
I googled "BB7211 3UU-00" those (above) were in the results. I Think the 600 exup TCI has the extra wires coming out of the middle.

Mal.
User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4153
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: What year is my CDI from?

Post by ragedigital »

WOW! Can't believe that guy is charging $200 for FZR600 CDIs and getting it.
Thanks for joining and participating in the most "active" FZR Community on the internet!
thatkid

Re: What year is my CDI from?

Post by thatkid »

ragedigital wrote:
WOW! Can't believe that guy is charging $200 for FZR600 CDIs and getting it.
:yikes:

I didn't notice that, the eBay uk one is, shipped £31.49 = $49.3858
sweekster
2000+ Posts
2000+ Posts
Posts: 2773
Joined: Tue May 13, 2008 10:52 am
Location: Perris, CA

Re: What year is my CDI from?

Post by sweekster »

yamaha_george wrote: Darrin,
you mean to tell me there is actually some detail on FZR's Sweekster does not know, sheesh I need to go lie down I have come over all faint.........................

J/K
Haha...I don't know everything. I can safely say that. I do appreciate the vote of confidence in the info that I can provide though (I have to stop sounding so damn corporate all the time).

Anyway, sciamanna44, more than likely the CDi/TCI you received is from an EXUP (aka California model) FZR600.
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD

Image


THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: What year is my CDI from?

Post by yamaha_george »

sweekster wrote:
yamaha_george wrote: Darrin,
you mean to tell me there is actually some detail on FZR's Sweekster does not know, sheesh I need to go lie down I have come over all faint.........................

J/K
Haha...I don't know everything. I can safely say that. I do appreciate the vote of confidence in the info that I can provide though (I have to stop sounding so damn corporate all the time).

Anyway, sciamanna44, more than likely the CDi/TCI you received is from an EXUP (aka California model) FZR600.
PHEW!!! Sweekster did know thank God for that & Sweekster now I can get back to work on my project knowing you all are still in good hands :-} :banjoman :banana: :headbang:

Glad to see MAWLER is studying hard to be the UK's own Sweekster :-} ClapHands Nerd
User avatar
cad600
1000+ Posts
1000+ Posts
Posts: 1413
Joined: Fri May 09, 2008 3:41 pm
Location: Atlanta, GA

Re: What year is my CDI from?

Post by cad600 »

It is a 600 Cali model - the part number in the micro fiche for a 92 fzr600 cali CDI is 3UU-82305-10-00
Yes, that is a Single Sided Swingarm FZR600 that I built.

Something is lurking, waiting, wanting to be built......It calls to me from the darkness....

I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
User avatar
KaMaKaZeE_FZR1
Site Newbie
Posts: 19
Joined: Mon Sep 27, 2010 9:58 pm
Location: Texas

Re: What year is my CDI from?

Post by KaMaKaZeE_FZR1 »

well if the 600 and the 1000 numbers follow the same pattern, my 89 1000 cdi is a 3LK-00 and my 90 is 3LK-01, now the cdi in my bike is 3LK-10 and i believe it is a 95 cdi on the newer harness. That tells me the last numbers refer to what gen the box was from, also the two connectors connected to the older harness and the servo I do believe so it was for an older bike ie. first gen 600

That being said, what are you doing with the harness?
Post Reply