Corbin Seat, or Stock
Moderators: Site Director, FZR Forum Moderators
Corbin Seat, or Stock
Which one do you guys think would create less wind resistance the stock seats, or an aftermarket Corbin. On an FZR6R.
-
Fizzinatorr
- Level 6.5
- Posts: 662
- Joined: Fri May 30, 2008 5:05 pm
- Location: Middle of NJ
Re: Corbin Seat, or Stock
Corbin is about 3x's heavier
So I think that helps make the choice, also the corbin is larger
the only benefit would be the shape which is slightly more diagonal
So I think that helps make the choice, also the corbin is larger
the only benefit would be the shape which is slightly more diagonal
8 Bikes so far...more coming too...
Finished my 2000 GSXR 750 -> Link here viewtopic.php?f=68&t=3617
Finished my 2000 GSXR 750 -> Link here viewtopic.php?f=68&t=3617
Re: Corbin Seat, or Stock
So how much is a corbin seat for an fzr worth? In other news for racing, I just got my EBC SRK racing clutch. And tomorrow I'm grabbing the forksprings, and the emulators.
-
ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: Corbin Seat, or Stock
Neither one unless there is no rider on them. The rider will create more wind resistance than the seat ever will.STN wrote:Which one do you guys think would create less wind resistance
The weight is the larger issue. Reduce as much weight as you can. Do you have a fiberglass tail on the FZR?
I think I had an Airtech TZ250 tail in the image below:
Thanks for joining and participating in the most "active" FZR Community on the internet!