1992 fzr plastics

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
nickl72
Site Newbie
Posts: 2
Joined: Wed Jul 21, 2010 10:16 pm

1992 fzr plastics

Post by nickl72 »

im trying to find out a place that sells all new plastic and fairing for my bike and help would be appreciated
User avatar
Fizzinatorr
Level 6.5
Level 6.5
Posts: 662
Joined: Fri May 30, 2008 5:05 pm
Location: Middle of NJ

Re: 1992 fzr plastics

Post by Fizzinatorr »

sharkskins - but its' crap

ebay - Sets from China but it's mostly crap

Airtech - takes forever to get but is decent enough

Your best bet: Watch ebay until someone parts out their OEM fairings and buy it as a set
8 Bikes so far...more coming too...Image

Finished my 2000 GSXR 750 -> Link here viewtopic.php?f=68&t=3617
User avatar
lt61173
50+ Posts
50+ Posts
Posts: 67
Joined: Tue Jun 22, 2010 9:59 am
Location: Republic, PA

Re: 1992 fzr plastics

Post by lt61173 »

I bought mine from here.
http://www.beasleycomposites.com/
They seemed to hold up good from the crash and took paint pretty good. You do have to drill some holes.

Larry
User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4153
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: 1992 fzr plastics

Post by ragedigital »

Fizzinatorr wrote:sharkskins - but its' crap
That's odd, I hear just the opposite. Then again, most of the people I hear from are racers.

Your best bet is watching eBay for a nice used OEM set. All of the other fiberglass ones are mainly for racing/track days.
Thanks for joining and participating in the most "active" FZR Community on the internet!
User avatar
Fizzinatorr
Level 6.5
Level 6.5
Posts: 662
Joined: Fri May 30, 2008 5:05 pm
Location: Middle of NJ

Re: 1992 fzr plastics

Post by Fizzinatorr »

To be more specific: I've never had experience with Sharkskins

but I've seen many forums topics/complaints about their poor quality and a lot of cracks
8 Bikes so far...more coming too...Image

Finished my 2000 GSXR 750 -> Link here viewtopic.php?f=68&t=3617
Post Reply