New muffler...

[bucket]

I was thinking about picking up a used 07 R6 muffler, for my FZR. The guy I bought the bike off of told me if I do anything to the bike ie muffler, pods,ect I would have to have the carbs tuned is this true? I might gut the muffler also. thanks all

I like bananas

[M in KC]

Generally, if you just fit a slip-on mufler you don't have to re-jet, generally. But If you put on pods, or a full exhaust system or pods and a full exhaust system you will have to re-jet for sure.

[bucket]

sweet! thanks. does any body know of a how to for carb tunning

[Fizzinatorr]

you should grab a haynes or clymer FZR manual - it will walk you through it step by step

or someone can possibly link you to one

[megaloxana]

This is what I have been using during my carb tune. It's written by the guys over at Factory Pro.
http://www.factorypro.com/tech_tuning_p ... gines.html

[YAM93]

I didn't think you could just schlap a new R6 muffler on an existing FZR header, thought the pipe diameters are different. You might have to get some mid-piece tube fabricated. See TK's thread on R6 header modification.

[bucket]

So wich is better haynes or clymer?
Thanks for the carb set page as well.

I expected there was going to be some fabing to make it work. I'll check out that header theread.

[95FZR600]

I was thinking about picking up a used 07 R6 muffler, for my FZR. The guy I bought the bike off of told me if I do anything to the bike ie muffler, pods,ect I would have to have the carbs tuned is this true? I might gut the muffler also. thanks all

I like bananas

I have the 07 R6 can and I didnt do anything extra to mine to install the can.

[bucket]

^^ So it bolted rigth on? makes me want one even more!!!

[95FZR600]

You will have to make your own mid pipe for it or have one fabbed up.

[bucket]

Thats what I thought I was going to have to do. We'll see if I can pick up the muffler.