Thats quite tidy George.
A thought that came straight to my mind though George,i would have a look with the main stripe lower down,running more from the side panel and lower on the front fairing,looking again though Blue is good tho .
ragedigital wrote:This thread was going downhill from the first post....
I would probably choose a painter that doesn't use crayons.
darrin
Darrin,
Unfortunately the side room at the hospital is just air-conditioned and the respatory unit would hate the spray booth fumes hence the marker pens.
With all the tubes (blood & medication chest monitor & oxy style masks etc) it was something of an effort to focus but was going nuts with boredom until the speedway came on the TV RESULT
Yamster wrote:Thats quite tidy George.
A thought that came straight to my mind though George,i would have a look with the main stripe lower down,running more from the side panel and lower on the front fairing,looking again though Blue is good tho .
Yamster,
I did that originally and realised it looked just like every other speedblock design I had seen, not that this is new RDRC's machine is similar to this but with mine there is astripe on the top of the tank that links into this side design.
Yamster.
KGB racing was a joke there were 3 Guys, Kerry (now deceased) George & Brian who were into bikes big time, 2 of us were chasing the Russians hence KGB Racing.
Beside my brother had CIA (Cycle International Associates)
Yamster.
KGB racing was a joke there were 3 Guys, Kerry (now deceased) George & Brian who were into bikes big time, 2 of us were chasing the Russians hence KGB Racing.
Beside my brother had CIA (Cycle International Associates)
Ha ha , I see.
1995 ,FZR 600,Factory Pro 1.1Ti Jet Kit, Yoshi slipon,K&N filter,elevation 4200 ft above sea level.
Carb settings: Main Jet 110, Starter Jet 52.5,Needle @ 3rd position,23m Floats,about 3 turns IM Screws. 80's-90's,Rap..music.?? http://www.last.fm/listen/user/unsmenar/personal
I like it George, though I reckon you should have the speedblocks running along the middle of the front mudguard also.
I also think a yellow race number plate background on the end of the tailpiece, extending up over the pillion seat cover, a bit like my bike had in it's original bodywork...