flat white exhaust?

[Kaje]

i've been thinking about painting my exhaust to a white, with like black stripes across the can. (not lengthwise) any opinions? would it looks tacky?

[Fizzinatorr]

I wouldn't do it, even hi temp paint on the exhaust is eventually gonna look like crap

[Kaje]

why is that?

[thatkid]

How hot does the exhaust get? i think that was the point. the paint will degrade over time.

Did you mean painting just the end can?

I know my can doesn't get to hot (only warm), it's damaged now, wasn't me honest so high temp paint may be OK but i ain't checked/tested! best left alone. unless your in the know, could screw up a decent looking can.

as for looking tacky, thought all you youngsters were shit hot with photoshop etc, and you could tell the oldies (me) what was tacky

is that cobra F1S (saw that in you introduction thread) can aluminium/alloy? i'd try polishing it if so. test polish on the underside where it wont be visible?

Bike looks great as is.

[thatkid]

That can is aluminum and could be polished. Or you could send it over to me and I could powdercoat it white. You could do the black stripes with vinyl stickers.

[Fizzinatorr]

If you do it powdercoat it, TK can give you a fair price

otherwise, besides it fading away i'm thinking it might be a good thing....here's a quick photoshop

[Fizzinatorr]

obviously not great, and probably not what you'd exactly want but still not my favorite

[Kaje]

That can is aluminum and could be polished. Or you could send it over to me and I could powdercoat it white. You could do the black stripes with vinyl stickers.

and how much would you charge to powdercoat? im only looking at doing this as a temporary measure, until i can buy a new exhaust.

also thank you fizzinator for the photoshop, but thats really not what i had in mind for the stripes. i'll do some photoshopping and show ya. ;]

[PIMPMYFZR]

that bike looks clean as hell .. thats how mine looked when i first brang it home same color scheme .. too bad it didnt stay that way for long ..
As for the pipe i would recommend if you decide to color it .. keep it one solid color .. you could always give it the brushed metal finish look if it wont polish up ..from the pic in your sig it doesnt seem to bad ..

[Kaje]

here's my idea for an exhaust painting. i think it looks snazzy. =]

[90fzr600]

I think that looks good actualy

[Kaje]

woo! any other comments?

[thatkid]

That can is aluminum and could be polished. Or you could send it over to me and I could powdercoat it white. You could do the black stripes with vinyl stickers.

and how much would you charge to powdercoat? im only looking at doing this as a temporary measure, until i can buy a new exhaust.

also thank you fizzinator for the photoshop, but thats really not what i had in mind for the stripes. i'll do some photoshopping and show ya. ;]

I'd do it for $60 shipped back to you with the black stripes done in there in a gloss black powder.

[Fizzinatorr]

That's much better than I had pictured (obviously)

I say go for it and you can not beat that deal from TK

[Kaje]

That can is aluminum and could be polished. Or you could send it over to me and I could powdercoat it white. You could do the black stripes with vinyl stickers.

and how much would you charge to powdercoat? im only looking at doing this as a temporary measure, until i can buy a new exhaust.

also thank you fizzinator for the photoshop, but thats really not what i had in mind for the stripes. i'll do some photoshopping and show ya. ;]

I'd do it for $60 shipped back to you with the black stripes done in there in a gloss black powder.

how much would it cost to ship it to you? (just the can right?)