r1 conversion body kit

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
User avatar
trump19
Site Newbie
Posts: 39
Joined: Sun Mar 07, 2010 4:07 pm
Location: rochester, NY
Contact:
Contact trump19

r1 conversion body kit

Post by trump19 »

hey i have a r1 body kit and im looking to change out the single head light to a projector light or something with a lil bit more style googled for a replacement but not to much luck the hole is a 4'' round let me know if any one has any ideas thanks :Kick
rocket till the wheels fall off
Top
gogofizzpow
Level 1.5
Level 1.5
Posts: 158
Joined: Sat Oct 03, 2009 8:45 pm
Location: Europe, California, Georgia, Belgium (yes, this is not part of the 1st one)

Re: r1 conversion body kit

Post by gogofizzpow »

have you thought about using the housing piece from 07 r6 or similar body series. looks like a bmw projector with a lower current draw
'96 FZR600
-Stainless brake lines, K&N Filter Pods, R6 front calipers, R6 Front and rear Master cylinder, Factory Pro Stg 1 Jetkit, R6 Headers (TK), '08 R6 Rear shock w/ adjustable dogbones (RR), Airtech R1 kit (and all the mods that go with that), Home made 5 d ignition advance, YZF600r D&D Modified short can with R6 mid pipe, Progressive rate front suspension, YZF600r Swingarm/wheel, 520 14/45, 47, 48 Sprockets, China's rearsets, YZF600r modified undertray, Cheap battery mod so I can run lay flat glass matts, And anything else I become compulsive enough to do to her...
-FOR SALE- *sniff sniff*
Top
User avatar
zero9243
Level 8.5
Level 8.5
Posts: 896
Joined: Wed May 28, 2008 3:23 pm
Location: Milwaukee, WI
Contact:
Contact zero9243

Re: r1 conversion body kit

Post by zero9243 »

As far as I know, no one has really modded the airtech kit for a better headlight. You are going to have to design something to fit in the space from scratch.
Upgrades:
  • Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
    WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
    V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
    Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
    Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
    Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
    Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
    Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
    Modking Aluminum Radiator Overflow Bottle--------




Top
User avatar
Fizzinatorr
Level 6.5
Level 6.5
Posts: 662
Joined: Fri May 30, 2008 5:05 pm
Location: Middle of NJ

Re: r1 conversion body kit

Post by Fizzinatorr »

I have a headlight which should work for you pm me
8 Bikes so far...more coming too...Image

Finished my 2000 GSXR 750 -> Link here viewtopic.php?f=68&t=3617
Top
User avatar
trump19
Site Newbie
Posts: 39
Joined: Sun Mar 07, 2010 4:07 pm
Location: rochester, NY
Contact:
Contact trump19

Re: r1 conversion body kit

Post by trump19 »

well i have a body kit iv been working on its the r1 kit from online ( bought the bike with it not my first choice) but im doing all this for my room mate he wants some kind of upgraded (if you will) head light something with a bit more style than stock. i was thinking some kind of projection head light just b/c of the style of the bulb housing. i really dont know if the bike can even handle this kind of upgrade just b/c its a old bike it may or may not be able to power it. let me know what you all think about this
rocket till the wheels fall off
Top
Post Reply

Return to “FZR600”