Signing Off
Moderators: Site Director, FZR Forum Moderators
-
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Signing Off
Fellow FZR owners,
I regret that I will be signing off from this Forum as soon as I can get my tickets outer here sorted.
Family matters are pressing for my attention and they must be dealt with, I will try to open comms from my home to england ASAP but the lines at home are not that reliable so I can make no firm commitment at this time .
I should be back in the UK by April
Until then try not to Screw up yer bike.
Later
Y_G
I regret that I will be signing off from this Forum as soon as I can get my tickets outer here sorted.
Family matters are pressing for my attention and they must be dealt with, I will try to open comms from my home to england ASAP but the lines at home are not that reliable so I can make no firm commitment at this time .
I should be back in the UK by April
Until then try not to Screw up yer bike.
Later
Y_G
Re: Signing Off
travel safe and we look forward to hearing from you again George, you're a true cornerstone of this place.
Re: Signing Off
Shiny side up, Geo.
Re: Signing Off
good luck hope everything works out for you
ones life is the way it is only because you allow it make it happen.
i poop my pants i poop my pants
i poop my pants i poop my pants
Re: Signing Off
Best to you George
Re: Signing Off
I hope you have your email open as I'll be sending some things. You should get that 250 ready for shipping to the USA.
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
Re: Signing Off
Good luck and safe travels George
'03 Liquid Silver R6
'91 FZR 600
'97 Forks w/ .85kg/mm Race Tech springs, Gold-Valve Emulators (2 turns), 20w fork oil / Fox Twin Clicker
R6 front calipers and master cylinder, R6 tail
YZF swingarm conversion
'01 R1 Digital Cluster conversion
K&N Drop-In, Factory Pro emulsion tubes, stock 5CFZ4 needle on clip 2, 22mm floats, mixture screws temp tuned
Bridgestone BT-016s 110/170
-
- Site Newbie
- Posts: 17
- Joined: Wed Sep 30, 2009 7:35 pm
- Location: Havelock North, Hastings, New Zealand
Re: Signing Off
Your knowledge and helpful advice will be sorely missed - whatever your plans are - have fun and regret nothing
Re: Signing Off
Do what you have got to do George,and look forward to hearing from you soon.
All i ask is you get back for the BMF show in may-i want that T-shirt!
Hope all goes well for you Friend .
All i ask is you get back for the BMF show in may-i want that T-shirt!
Hope all goes well for you Friend .
-
- Level 3.5
- Posts: 390
- Joined: Mon Jun 09, 2008 1:51 am
- Location: Mijas Costa, Malaga, Spain.
Re: Signing Off
I`ll be looking forward to April then (when you said you will be back) If you don`t return by then we will have to come and get you...
That is a a warning Stay safe till then.
That is a a warning Stay safe till then.
Re: Signing Off
"Life is short, Break the rules, Forgive quickly, Kiss slowly, Love truly,
Laugh uncontrollably, And never regret anything that made you smile."
- And get back here asap! We'll miss you!
On the other hand:
When the cats away...
Laugh uncontrollably, And never regret anything that made you smile."
- And get back here asap! We'll miss you!
On the other hand:
When the cats away...
1998 FZR600
All Original, except for a custom saddlebag set up. A machine shop buddy of mine seamlessly fitted two GS bags on the rear end for last summers ride.
30,000+ odo
All Original, except for a custom saddlebag set up. A machine shop buddy of mine seamlessly fitted two GS bags on the rear end for last summers ride.
30,000+ odo
-
- Level 8.0
- Posts: 824
- Joined: Mon May 12, 2008 5:52 pm
- Location: Princeton, NJ
Re: Signing Off
You will be missed YG! All the best, see you in april
NO FZR
05 Yamaha R1
03 Harley Fatboy
what's next?
05 Yamaha R1
03 Harley Fatboy
what's next?
Re: Signing Off
See you in April mate if not sooner. All the best to you and yours.
M
M
- the_finch
- Level 8.5
- Posts: 882
- Joined: Tue Jun 03, 2008 8:06 pm
- Location: Midland City, AL / UAHuntsville, Huntsville, AL
Re: Signing Off
We will miss you, George. We wish the best to you on your hiatus and hope everything works out well for you. Thanks for all the help!
Keep the shiny side up!
Keep the shiny side up!
1997 FZR600RJ
Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
-
- Level 5.0
- Posts: 509
- Joined: Sun Jun 15, 2008 10:52 pm
Re: Signing Off
NOOOOOOOOOOooooooooooooooooo Don't leave meeeeeeeeeeee!