trying to switch over from dual to single 7" headlight

[89fzr600rr]

i got into an accident about a month back so im fighterizing my 89. im going with a single 7" headlight and am not sure how to do the wiring. could i get a harness from a fzr with the single light setup and use that? you know so i dont have the extra headlight plug just hanging there? i wouldnt mind just chopping the harness my self but i really dont like wiring. just not good at that aspect. either way please let me know what options i have.

jono

[mike94fzr600]

when i did my light i just used the wire diagram in the wiki. when i order my light it came with a new connect

[shredex]

dual = two connectors.
single = one connector

cant you just use the two connectors and only plug one of them into the single?

[yamaha_george]

dual = two connectors.
single = one connector

cant you just use the two connectors and only plug one of them into the single?

Shred,
He did say he did not want to do that ! I made up a pigtail that plugged into each socket & coupled the two sockets into one lead & plugged that in to the one light.

That way if you want to go back to dual or the next owner does you just unplug the pig tail & away you go to duals again.

Since you do not like wiring I am sure someone here can make you a pigtail that will work.

None of the list know where you are since you have ignored the plea for a location in your details so the offer above is as good as it gets, who knows you may have another member close to actually install it for you.

[shredex]

trueeeeee....

[89fzr600rr]

that would be awesome if someone wanted to do that for me.. also anyone have a good gauge setup they like? i was thinking of going with an acewell or a veypor unit. any feedback would be great.