Coolant bottle's

Any topic relating to the FZR/YZF (UK) or motorcycling in general.

Moderators: Site Director, FZR Forum Moderators

Post Reply
User avatar
1993FZR600
50+ Posts
50+ Posts
Posts: 61
Joined: Sat Jun 07, 2008 2:22 pm
Location: Ft. Lauderdale, FL USA

Coolant bottle's

Post by 1993FZR600 »

I plan on do a R1 Airtech rear seat. dose anyone has pictures of there coolant bottle's please post i'd like to get some ideas :duh:
93 FZR 600 on the table.
Top
User avatar
95FZR600
2000+ Posts
2000+ Posts
Posts: 2972
Joined: Sat May 31, 2008 10:41 pm
Location: Kennesaw, Georgia

Re: Coolant bottle's

Post by 95FZR600 »

Mine mounts on the subframe behind the wide part of the tail. Right now its just held in by zip ties but it works.
2002 Yamaha R6-----2003 Yamaha R6

Image
Top
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:
Contact megaloxana

Re: Coolant bottle's

Post by megaloxana »

I'll take a pictures of mine. Its a home made bottle out of PVC and fitings. Works great, fits well.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Top
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: Coolant bottle's

Post by yamaha_george »

megaloxana wrote:I'll take a pictures of mine. Its a home made bottle out of PVC and fitings. Works great, fits well.
ML,
RCPlayland used a fuel tank from a model aircraft I believe you will have to look at the FZRArchive for his pictures
:king
Top
User avatar
R3TARD
Level 4.5
Level 4.5
Posts: 491
Joined: Thu May 22, 2008 7:07 pm
Location: north Georgia
Contact:
Contact R3TARD

Re: Coolant bottle's

Post by R3TARD »

zip tied to the sub frame beneath the widest part of the airtech tail.

1992 FZR 600
Yoshi exhaust
K&N pods
Airtech R1-kit
02 R6 fork swap
02 R6 Swingarm
520 chain conversion
07 R6 controls
Vortex R6 clipons
07 R6 radial master

2003 CBR 600rr
bone stock
Top
User avatar
95FZR600
2000+ Posts
2000+ Posts
Posts: 2972
Joined: Sat May 31, 2008 10:41 pm
Location: Kennesaw, Georgia

Re: Coolant bottle's

Post by 95FZR600 »

Agreed
2002 Yamaha R6-----2003 Yamaha R6

Image
Top
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:
Contact megaloxana

Re: Coolant bottle's

Post by megaloxana »

R3TARD wrote:zip tied to the sub frame beneath the widest part of the airtech tail.
Thats exactly how mine is mounted
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Top
User avatar
R3TARD
Level 4.5
Level 4.5
Posts: 491
Joined: Thu May 22, 2008 7:07 pm
Location: north Georgia
Contact:
Contact R3TARD

Re: Coolant bottle's

Post by R3TARD »

Hey megaloxana, not to hijack this thread but how much acceleration increase did you see out of your 520 / 14/47 conversion

1992 FZR 600
Yoshi exhaust
K&N pods
Airtech R1-kit
02 R6 fork swap
02 R6 Swingarm
520 chain conversion
07 R6 controls
Vortex R6 clipons
07 R6 radial master

2003 CBR 600rr
bone stock
Top
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:
Contact megaloxana

Re: Coolant bottle's

Post by megaloxana »

R3TARD wrote:Hey megaloxana, not to hijack this thread but how much acceleration increase did you see out of your 520 / 14/47 conversion
You definatly notice it. I dont normally travel at 145mph so the conversion was nothing but positive for me. Bike overall has a lot more spunk. I would definatly do it again :thumbsup:

As promised, here's my home made PVC coolant bottle. I'd tell you guys the exact details on the fittings and such but its been 2 years since i built it. Not hard to figure out as long as you have your hose diameters. Used high strength epoxy to hold all the fittings and made sure it was sealed. Ill be more than happy to take dimensions though if anyone needs them.

Image
Image
Image
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Top
User avatar
zero9243
Level 8.5
Level 8.5
Posts: 896
Joined: Wed May 28, 2008 3:23 pm
Location: Milwaukee, WI
Contact:
Contact zero9243

Re: Coolant bottle's

Post by zero9243 »

Thatkid's handywork

Image
Upgrades:
  • Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
    WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
    V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
    Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
    Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
    Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
    Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
    Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
    Modking Aluminum Radiator Overflow Bottle--------




Top
User avatar
1993FZR600
50+ Posts
50+ Posts
Posts: 61
Joined: Sat Jun 07, 2008 2:22 pm
Location: Ft. Lauderdale, FL USA

Re: Coolant bottle's

Post by 1993FZR600 »

:tks: on the picture's don't need dimensions just need so idears
:offtopic:
MEGALOXANA
what size rear tire is that ? & where can i get one like the style
93 FZR 600 on the table.
Top
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:
Contact megaloxana

Re: Coolant bottle's

Post by megaloxana »

2xls wrote::tks: on the picture's don't need dimensions just need so idears
:offtopic:
MEGALOXANA
what size rear tire is that ? & where can i get one like the style
Its a BT014 in 150/60r18 flavor
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Top
User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4153
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: Coolant bottle's

Post by ragedigital »

megaloxana wrote:Its a BT014 in 150/60r18 flavor
I run the same tire.

My coolant bottle is a gatorade bottle right now. I like the PVC idea. I'm sure regular PVC glue would be more than sufficient.

Image
Thanks for joining and participating in the most "active" FZR Community on the internet!
Top
thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:
Contact thatkid

Re: Coolant bottle's

Post by thatkid »

I used to run the pvc tube for an overflow until I got my Sigg bottle. I love that thing.
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
Top
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:
Contact megaloxana

Re: Coolant bottle's

Post by megaloxana »

rage, the gatorade bottle looks hilarous LOL2 Wonder what people think that aren't acustomed to such genius. You definatly should have left the label on there(lime flavor especially). I didn't trust PVC glue keeping my fittings tight and secure.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Top
Post Reply

Return to “General Discussion”