lots of 400 and 1500 grit sand paper and some mothers polish. mothers works great!
passenger bracket bling!
Moderators: Site Director, FZR Forum Moderators
passenger bracket bling!
i was bored the last few days so i decided to clean up my passenger brackets on my 1K they turned out pretty sharp.
lots of 400 and 1500 grit sand paper and some mothers polish. mothers works great!
lots of 400 and 1500 grit sand paper and some mothers polish. mothers works great!
1989 FZR 1000 with an 01 R1 front end. k&n filters, vance & hines exhuast. currently down for a new face lift.
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation
Re: passenger bracket bling!
Lookin good! how are your arms?3LK1-FZR wrote:i was bored the last few days so i decided to clean up my passenger brackets on my 1K they turned out pretty sharp.
lots of 400 and 1500 grit sand paper and some mothers polish. mothers works great!
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: passenger bracket bling!
Nice. Might as well break the bike down and do the frame...just saying...
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Re: passenger bracket bling!
umm polished lips! No, that's Duane's line. Hmm.....
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
Re: passenger bracket bling!
my arms are fine...my fingers cramped up alot though but it was worth it i dont plan on doing the frame...i think if i did that my arms and hands would sue for divorce! 
i dont plan on doing the frame...i think if i did that my arms and hands would sue for divorce! 1989 FZR 1000 with an 01 R1 front end. k&n filters, vance & hines exhuast. currently down for a new face lift.
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation